• Teach Your Kids the Basics of Programming With the Grove Junior Kit

    You can play Grove Junior out-of-box without any software programming. If you connect different inputs and outputs in the circuit, you can make a gadget quickly and easily, like a line following car or motor controller using...

    • Posted 3 weeks ago
    • 0
  • Diskio Pi: the DIY Tablet Kit for Raspberry Pi Once Again on Kickstarter

    Last year we wrote about a DIY tablet kit for Raspberry Pi, ODROID-C2/XU4 and other compatible boards launched via Kickstarter: it was the modular and fully hackable hardware Diskio Pi project. But unfortunately it failed likely due to the high...

    • Posted 3 weeks ago
    • 0
  • Hardware Security Keys Go Open Source With Solo

    If you are concerned about your social networking accounts, cloud storage or falling foul to sophisticated phishing techniques online, you may be interested in a new open source FIDO2 security key that is equipped with both NFC...

    • Posted 4 weeks ago
    • 0
  • Picam360 Surface Walker: the Aquatic Drone With Real-Time Panoramic Video

    The Picam360 is open source Raspberry Pi based camera that takes panoramic pictures in 360 degrees horizontally and 235 degrees vertically, controlled through a web browser and  Surface Walker is an open source aquatic drone built around this...

    • Posted 1 month ago
    • 0
  • Build Robots, Learn Programming, And Stay Ahead With MoonBot DIY Kit

    A new DIY robotic kit has been launched via Kickstarter this week called MoonBot, which has been designed for learning more about modern robotics and artificial intelligence. Each kit allows you to build three robots and all subscribers will...

    • Posted 1 month ago
    • 1
  • Magilyzer EM800: DIY Audio Spectrum Analyzer Kit Now on Kickstarter

    The Magilyzer EM800 is an analog audio spectrum analyzer, based around an analog analyzer chip. The DIY Audio Spectrum Analyzer consists of a 6 Band Audio Spectrum Analyzer with 6 x New Old Stock German TELEFUNKEN EM800...

    • Posted 2 months ago
    • 0
  • Libre Computer Introduces the Linux-ready Open Source La Frite SBC

    Libre Computer Project’s La Frite development board is based on the Raspberry Pi A+ but has a different layout and more real-world ports than the A+, although it offers a similar 40-pin expansion header. LCP’s La Frite is the miniature...

    • Posted 2 months ago
    • 0
  • MAKERphone: An educational DIY mobile phone

      MAKERphone is an educational DIY mobile phone designed to bring electronics and programming to the crowd in a fun and interesting way. It’s a fully functional mobile phone that you assemble and code yourself.    ...

    • Posted 2 months ago
    • 0
  • Raspberry Pi based smart watering system kit for Makers

    Designed to provide plenty of feedback on your plants environment, soil and condition, the Raspberry Pi plant monitoring system is also capable of automatic watering when required and updating you when anything may need your attention. Smart...

    • Posted 2 months ago
    • 0
  • IoT LoRa Boards Run on Raspberry Pi, Arduino and Micro:Bit!

    Pi Supply, which has produced a variety of Raspberry Pi add-on boards, is now on Kickstarter to launch a series of IoT LoRa Boards that work with the Pi. The offerings include an IoT LoRa Gateway HAT board...

    • Posted 2 months ago
    • 1
  • OpenMV Cam H7: the Open Source MicroPython Powered Machine Vision Camera

    The New OpenMV Cam H7 is an upgrade of the previous OpenMV Cam M7, replacing the STMicro STM32F7 micro-controller by a more powerful STM32H7 MCU clocked at up to 400 MHz and introducing removable camera modules for thermal...

    • Posted 3 months ago
    • 1
  • BioControle : Aquaponic and hydroponic I/O Add-on for Raspberry Pi

    Luxembourg based Upsilon Engineering, has gone to Kickstarter to launch its BioControle add-on board for the Raspberry Pi 3. The board can be used as a general purpose I/O and DAQ add-on but is specifically designed as...

    • Posted 3 months ago
    • 0
  • Zero BreadBoard Multi-Power Supply

    The Zero Multi-Power Supply is a powerful power supplier board for your electronics project and it offers a number of input and outputs and can easily be attached to a breadboard providing outputs from 1.25V-24V. Features are: Multi...

    • Posted 3 months ago
    • 0
  • Raspiboy: Raspberry Pi Retrogames Console

      Designed and created to be capable of running a wide variety of different emulators, Raspiboy allows owners to enjoy a massive library of retro games. The maker Pierre-Louis Boyer has once again taken to the Kickstarter crowdfunding...

    • Posted 4 months ago
    • 0
  • Lotus EZ: a User-Friendly LCD SLA 3D Printer

    Lotus has created a new resin 3D printer: the Lotus EZ. It has been designed and manufactured to the highest quality standards and has this week taken to Kickstarter to raise the required €50,000 needed to make the...

    • Posted 4 months ago
    • 0
  • Nanomesher Introduces 3 Out-of-the-Box Kits Perfect for Your Pi

    The engineers and programmers at Nanomesher want to push the boundaries of what we can do with single board computers, and they want to encourage everyone to come into the hobby. Their current Kickstarter campaign is introducing a weather station, a...

    • Posted 4 months ago
    • 0
  • Ready-to-Solder SAMD HCC Arduino and CircuitPython Compatible Module

    There is a ton of different development boards on the market that will do exactly what you want for any particular project, and come loaded with all of the components necessary to get them up and running....

    • Posted 4 months ago
    • 0
  • Sunflower Shield – 3.5” HMI Display for the Open Source Community

    Bridgetek’s Embedded Video Engine technology is gaining more traction within the global open-source community, as well as with larger OEMs. The latest of  integrated graphics controllers is the Sunflower Shield. Using the FT813 EVE IC, the Sunflower Shield allows makers...

    • Posted 4 months ago
    • 0