- 3DRAG + MOTORFISH: How to prevent step losses in 3D printerPosted 3 weeks ago
- Motorfish: The stepper does not misses a step (the Firmware)Posted 4 weeks ago
- Motorfish: The stepper does not misses a stepPosted 4 weeks ago
- “Maker Faire Rome – The European edition” returns to the Gazometro OstiensePosted 3 months ago
- Single-chip saturation meterPosted 4 months ago
- Raspberry Pi Relay BoardPosted 5 months ago
- PCB CAD, A SELECTION GUIDEPosted 5 months ago
- Automatic dispenser for catsPosted 6 months ago
- Do you have a mask? RASPBERRY Pi SEES ITPosted 6 months ago
- RFID based Attendance system using Arduino and External EEPROMPosted 6 months ago
Lasersaur: Open Source Laser Cutter
Design a laser cutter and make the building process repeatable for others. The result is an affordable and easy to maintain system for everybody.
Laser cutters are traditionally expensive ($30,000 to as much as you can spend) and there are a lot of artist, hackers, architects, designers, DIYers who could do great things with them- if they could afford one, or even get regular access to one. Pretty much anybody who is a maker could benefit from a laser cutter. Unfortunately, turnkey systems are expensive, and there isn’t really a clear and simple way to build one…
Related Posts
-
Arduino ISP (In System Programming) and stand-alone circuitsWe use an Arduino to program other ATmega without...
- Posted 10 years ago
-
-
-
GSM GPS shield for ArduinoShield for Arduino designed and based on the module...
- Posted 9 years ago
-
Small Breakout for SIM900 GSM ModuleSome post ago we presented a PCB to mount...
- Posted 11 years ago
-
3DRAG + MOTORFISH: How to prevent step losses in 3D printerIt solves the problem of pitch loss that can...
- Posted 3 weeks ago
-
Motorfish: The stepper does not misses a step (the Firmware)Let’s describe the firmware of the stepper motor feedback...
- Posted 4 weeks ago
-
Plexiglass parts and 3D printed containerSet containing all the LASER-cut plexiglass parts and the...
- Posted 4 weeks ago
-
Strip 144 LED NEOPIXEL length 1 meter – IP67Addressable light strip with144 high brightness, flexible and weatherproof...
- Posted 4 weeks ago
-
Arduino Mega ProtoshieldThis experimental board, made specifically for Arduino Mega, makes...
- Posted 4 weeks ago
