• 3D Printed Open Source Automated Feeding System

    Katrina Nguyen is currently a Biomedical Engineering graduate student at Carnegie Mellon University studying motor neuroscience research. Katrina designed an open source automated feeding system that aims to help researchers better monitor the daily intake of laboratory...

    • Posted 6 days ago
    • 0
  • Kodak Has Launched its Raspberry Pi Based Desktop Portrait 3D Printer

    Kodak and Smart International have collaborated on a professional, dual extrusion Kodak Portrait 3D Printer that runs a Linux-based 3DprinterOS on a Raspberry Pi 3 board. The $3,500 device is designed for engineering, design, and education professionals....

    • Posted 3 weeks ago
    • 0
  • Prusament: the PLA Filament By Prusa

    Prusa Research develops 3D printing hardware, electronics, software, and firmware. Unsatisfied with the quality of affordable filament available on the 3D printing market, Prusa and his team of over 40 professionals began building a filament factory to develop...

    • Posted 3 months ago
    • 0
  • How to Speed Up 3D Printing By Exploiting the Cloud

    Chinedum Okwudire, associate professor of mechanical engineering who directs U-M’s Smart and Sustainable Automation Research Lab, and his team have been experimenting with a new way of controlling 3D printers, where stepper motor commands (and other low-level...

    • Posted 3 months ago
    • 0
  • Lotus EZ: a User-Friendly LCD SLA 3D Printer

    Lotus has created a new resin 3D printer: the Lotus EZ. It has been designed and manufactured to the highest quality standards and has this week taken to Kickstarter to raise the required €50,000 needed to make the...

    • Posted 4 months ago
    • 0
  • Tantillus R: the Reborn of a tiny, highly portable and precise 3D printer

    In 2012 the Tantillus was a small printer, with the entire frame fitting in a 250mm square, but still able to print a 100mm cube. You could print the entire printer, and it was adorable. In the past...

    • Posted 6 months ago
    • 0
  • DIY a Cardboard Raspberry PI Tablet

    “These days, people tend to jump straight to rapid prototyping with a 3D printer. But, the reality is that it’s only rapid relative to traditional manufacturing. Even a simple design can take an experienced CAD operator hours...

    • Posted 7 months ago
    • 0
  • OctoRemote: the Hackable Keyboard Designed for 3D Printing Control

    OctoRemote is an Arduino compatible keyboard to control OctoPrint enabled 3D printers or to be used as customizable input device. OctoRemote, which is currently in the crowdfunding stage on Kickstarter, is a configurable 19-key remote. It uses...

    • Posted 7 months ago
    • 1
  • M3D Crane Quad is the First Multi-Material and Multi-Color Desktop 3D Printer

    Designed for enthusiasts, Crane Quad is the industry’s first multi-material desktop 3D printer that can produce true multi-colored objects. It promises 50,000 colors, a build volume of 214 x 214 x 230mm, and a full-color palette. Building...

    • Posted 7 months ago
    • 0
  • 3D4040: printing big!

      It is no longer a problem, nor it is expensive, to print big size items and terrain models: we showed you that by means of our new creation, the FDM 3D printer that our well-equipped readers...

    • Posted 8 months ago
    • 0
  • E3D Has Developed a Tool-Changer and a Motion-System for 3D-Printers

    “Tool-changing is an internal passion project here at E3D, but we’re not sure whether there is demand for a machine which is just the motion system and tool-changer. Please help us figure out whether to start building...

    • Posted 8 months ago
    • 0
  • 3D Printed Sega Dreamcast Raspberry Pi Case with Cooling Fan

    FoxTail has recently released via Thingiverse website the 3D printing files of its Sega Dreamcast Pi Case, allowing anyone with access to a 3D printer to replicate the case to protect their own Raspberry Pi SBC. The...

    • Posted 9 months ago
    • 0
  • 3D4040: The big 3D printer with a small price

        This printer has a building volume of 400 x 400 x 400 mm; it integrates all the functions of the 3Drag, including the “hackability”, that is typical of the Arduino-based controller.   When we created...

    • Posted 9 months ago
    • 1
  • Hundreds of 3D Printers in One Room: It’s the New Prusa Printing Farm

    In the summer of 2017 Prusa moved to a new building searching for more room. In this new place they finally have enough space for a proper 3D Print Farm: they have a total of 300 3D printers at the...

    • Posted 10 months ago
    • 0
  • Desktop 3D Printing is Changing Direction

    On Designnews.com you can find an interesting post about the potential near future of 3D Printing. Let’s see together an extract from the original post. “For years, even 10 to 20 years ago, we’ve talked about a...

    • Posted 10 months ago
    • 0
  • How many 3D printers could a 3D printer 3D print?

    Taken from the original post on 3DPrint.com. “How many 3D printers could a 3D printer 3D print if a 3D printer could 3D print 3D printers?” Colorado-based Aleph Objects brought nine LulzBot 3D printers and four techs...

    • Posted 11 months ago
    • 0
  • OctoPrint and a Pi ZeroW is all You Need to Upgrade your 3D Printer!

    OctoPrint is an open source software created and maintained by Gina Häußge. It offers a web interface so users can control and monitor their 3D printers from anywhere, any time, from within their browser. It basically turns...

    • Posted 11 months ago
    • 0
  • Poly: Multi-Tool Portable 3D Printer And Engraver

    A small portable 3D printer and multitool engraving system has been launched via Kickstarter this week which offers a unique battery-powered fabrication machine that is biodegradable and uses open source firmware and software. “Poly is a multitool...

    • Posted 1 year ago
    • 1