• Easy Frame 3D Printer Frame Kit Is The Easiest Way to Build Your Printer

    Created by Speeko, the 3D printer frame kit offers an easy way to build an accurate 3D printer and provides everything you need to create a foundation on which you can build a reliable and accurate desktop...

    • Posted 1 year ago
    • 0
  • 3Drag – 3D printer – KIT

    3D printer to print objects of maximum size of 20 x 20 x 20 cm using ABS or PLA 3mm wires. Extremely fast and precise even in prints at higher speeds. Compatible with all free software and...

    • Posted 1 year ago
    • 0
  • Hexbot All-In-One Desktop Robot Arm

    The engineers and development team at Hexbot developed a robotic arm that could be versatile and affordable while keeping an entry-level feel so that anyone might want to try it. It is capable of 3D printing, drawing,...

    • Posted 1 year ago
    • 0
  • Convert Your Printrbot Play in a Mobile 3D Printer!

    Not content with a 3D printer that spends most of its life in a basement workshop or home office, the YouTuber Thomas Sanladerer decided to build a completely mobile 3D printer. He modified a small inexpensive unit to run on...

    • Posted 1 year ago
    • 0
  • Table Lamp or 3D Printer, That is the Question!

    The Tiger Q3D 3d printer was born from a partnership between Flying Tiger Copenhagen and Politronica and is the first table lamp and 3d printer into a single form. The q3d’s arm moves with precision using wires and cords...

    • Posted 1 year ago
    • 0
  • 3D Printed Open Source Automated Feeding System

    Katrina Nguyen is currently a Biomedical Engineering graduate student at Carnegie Mellon University studying motor neuroscience research. Katrina designed an open source automated feeding system that aims to help researchers better monitor the daily intake of laboratory...

    • Posted 1 year ago
    • 0
  • Kodak Has Launched its Raspberry Pi Based Desktop Portrait 3D Printer

    Kodak and Smart International have collaborated on a professional, dual extrusion Kodak Portrait 3D Printer that runs a Linux-based 3DprinterOS on a Raspberry Pi 3 board. The $3,500 device is designed for engineering, design, and education professionals....

    • Posted 2 years ago
    • 0
  • Prusament: the PLA Filament By Prusa

    Prusa Research develops 3D printing hardware, electronics, software, and firmware. Unsatisfied with the quality of affordable filament available on the 3D printing market, Prusa and his team of over 40 professionals began building a filament factory to develop...

    • Posted 2 years ago
    • 0
  • How to Speed Up 3D Printing By Exploiting the Cloud

    Chinedum Okwudire, associate professor of mechanical engineering who directs U-M’s Smart and Sustainable Automation Research Lab, and his team have been experimenting with a new way of controlling 3D printers, where stepper motor commands (and other low-level...

    • Posted 2 years ago
    • 0
  • Lotus EZ: a User-Friendly LCD SLA 3D Printer

    Lotus has created a new resin 3D printer: the Lotus EZ. It has been designed and manufactured to the highest quality standards and has this week taken to Kickstarter to raise the required €50,000 needed to make the...

    • Posted 2 years ago
    • 0
  • Tantillus R: the Reborn of a tiny, highly portable and precise 3D printer

    In 2012 the Tantillus was a small printer, with the entire frame fitting in a 250mm square, but still able to print a 100mm cube. You could print the entire printer, and it was adorable. In the past...

    • Posted 2 years ago
    • 0
  • DIY a Cardboard Raspberry PI Tablet

    “These days, people tend to jump straight to rapid prototyping with a 3D printer. But, the reality is that it’s only rapid relative to traditional manufacturing. Even a simple design can take an experienced CAD operator hours...

    • Posted 2 years ago
    • 0
  • OctoRemote: the Hackable Keyboard Designed for 3D Printing Control

    OctoRemote is an Arduino compatible keyboard to control OctoPrint enabled 3D printers or to be used as customizable input device. OctoRemote, which is currently in the crowdfunding stage on Kickstarter, is a configurable 19-key remote. It uses...

    • Posted 2 years ago
    • 1
  • M3D Crane Quad is the First Multi-Material and Multi-Color Desktop 3D Printer

    Designed for enthusiasts, Crane Quad is the industry’s first multi-material desktop 3D printer that can produce true multi-colored objects. It promises 50,000 colors, a build volume of 214 x 214 x 230mm, and a full-color palette. Building...

    • Posted 2 years ago
    • 0
  • 3D4040: printing big!

      It is no longer a problem, nor it is expensive, to print big size items and terrain models: we showed you that by means of our new creation, the FDM 3D printer that our well-equipped readers...

    • Posted 2 years ago
    • 0
  • E3D Has Developed a Tool-Changer and a Motion-System for 3D-Printers

    “Tool-changing is an internal passion project here at E3D, but we’re not sure whether there is demand for a machine which is just the motion system and tool-changer. Please help us figure out whether to start building...

    • Posted 2 years ago
    • 0
  • 3D Printed Sega Dreamcast Raspberry Pi Case with Cooling Fan

    FoxTail has recently released via Thingiverse website the 3D printing files of its Sega Dreamcast Pi Case, allowing anyone with access to a 3D printer to replicate the case to protect their own Raspberry Pi SBC. The...

    • Posted 2 years ago
    • 0
  • 3D4040: The big 3D printer with a small price

        This printer has a building volume of 400 x 400 x 400 mm; it integrates all the functions of the 3Drag, including the “hackability”, that is typical of the Arduino-based controller.   When we created...

    • Posted 2 years ago
    • 1