• Avenger96 96Boards Features an STMicro STM32MP1 MPU

    Distributor Arrow Electronics has introduced the Avenger96 Development Platform and System on Module (SoM) to connect the power and flexibility of the latest STMicroelectronics STM32MP1 microprocessor with the strength of the STM32 and 96Boards ecosystems. Arrow worked...

    • Posted 2 months ago
    • 0
  • iCEBreaker FPGA Development Board Specifically Designed for You

    Field-programmable gate arrays (FPGAs) are a very different to a regular microcontroller board. With a microcontroller you have control over is the software, the code that runs on the chip, but with an FPGA you start with...

    • Posted 2 months ago
    • 1
  • Cthulhu Shield: Open Source Sensory Augmentation Platform for Arduino

    Created by engineer Joel Moritz Jr, the Cthulhu Shield is a new open source sensory substitution and sensory augmentation development kit for Arduino. The device takes the form of an Arduino Uno or Mega shield, with a strange flexible...

    • Posted 2 months ago
    • 0
  • STMicro STEVAL-FKI001V1: IoT Development Kit to Facilitate Smart Device Connections

    By supporting concurrent communication over Bluetooth Low Energy (BLE) and Sub-1GHz wireless, the STMicroelectronics STEVAL-FKI001V1 dual-radio development kit gives unrivaled flexibility to envision, build and connect IoT devices like smart sensors, finders and trackers which can be...

    • Posted 3 months ago
    • 0
  • Misty II, Your Next Development Platform

    Ian Bernstein, founder and head of product at Misty Robotics is calling for a departure from thinking of robots as tools and machines to thinking of them more as platforms. Misty is looking to employ the collective...

    • Posted 3 months ago
    • 0
  • miniNodes Raspberry Pi CoM Hardware Platform is able to Accomodate up to 5 Raspberry pi 3 Boards

    MiniNodes has launched $259 pre-orders for a carrier board that supports up to 5x Raspberry Pi Compute Module 3 modules. The 5 Node Raspberry Pi 3 CoM Carrier Board provides a switched Gigabit Ethernet port to provide networking availability...

    • Posted 4 months ago
    • 0
  • STM8 Nucleo Boards Connect 8-bit MCUs to Open Source IoT Projects

    STMicroelectronics has introduced two STM8* Nucleo development boards: NUCLEO-8S208RB and NUCLEO-8L152R8 boards (including 64-pin STM8S208 and STM8L152 microcontroller respectively) are available now, priced from $10.32. The two STM8 Nucleo boards are supported by major development toolchains including the Cosmic IDEA toolchain, the IAR™ EWSTM8 Integrated development...

    • Posted 7 months ago
    • 0
  • XinaBox xChips: IoT-focused prototyping, coding, making and learning by RS Components

    With the XinaBox xChip hardware modules, RS Components is adding more ways to prototype and expand the functionality of popular single-board computers like Raspberry Pi and BeagleBone. The xChip concept makes a wide variety of electronic functions...

    • Posted 9 months ago
    • 0
  • Octavo Systems Has Developed Its First Self-Branded SBC

    The open-spec OSD3358-SM-RED is the first Octavo Systems’ SBC based on one of its SiP modules. The SBC uses the 21 x 21mm OSD335x-SM  SiP module, which packs a 1GHz Texas Instruments Sitara AM3358 SoC. The OSD3358-SM-RED, is a BeagleBone-like development platform...

    • Posted 1 year ago
    • 0
  • Chatterbox Pi, the Alexa Development Board Designed for the Rpi Compute Module

    Gumstix has developed a variation on its recently announced Chatterbox for the Colibri iMX7 that is instead powered by a Raspberry Pi Compute Module. The board has been designed in Geppetto and it’s fully customizable online. The Linux-powered audio...

    • Posted 1 year ago
    • 0
  • AutoPi, The Open Source Platform to “Improve” Your Car

    A Danish startup called AutoPi.io has gone to Kickstarter to launch a Raspberry Pi Zero W based AutoPi dongle that plugs into the same OBD-II port that automotive repair people use to run diagnostics and tap other...

    • Posted 2 years ago
    • 1
  • Compact Electric Vehicles Welcome Pacer With Open Arms

    With Pacer, Faraday Motion wants to provide a set of standard, modular components paired with open-source software for developers and makers to create affordable and simple electric vehicles. Pacer is build on top of the Arduino core for ESP8266 and is running...

    • Posted 2 years ago
    • 0