With this project we will see how to make a solar powered wireless weather station using an ESP32 WiFi module and some common weather sensors. The weather station is fully solar powered, so you don’t need to...

This project aims to monitor the temperature and humidity in a room, through a compact and cheap device, powered via USB and which sends data to our smartphone through WiFi communication. The circuit consists of an ESP8266...

  Do you ever suddenly get the chills, so you check the temperature inside your room to make sure you’re not paranoid but then realize you don’t have any way to check? Or when the weather station’s...

    In this project, I am going to show how I made Alexa enabled home monitoring and controlling system using RSL10 Sense Development Board from ON Semiconductor. RSL10 is used to sense the environmental parameters (temperature,...

Build a cloud weather station dashboard to visualize your ESP32 or ESP8266 sensor readings from anywhere in the world. You’ll see your sensor data displayed on gauges and on a table. The ESP32 or ESP8266 will make...

  In this project, you’ll build a sensor monitoring system using a TTGO LoRa32 SX1276 OLED board that sends temperature, humidity and pressure readings via LoRa radio to an ESP32 LoRa receiver. The receiver displays the latest...

  Since I am a man of science and I like data to know if something is actually working, I wanted to put my knowledge of IoT and electronics to good use and create an IoT Terrarium...

The Raspberry pi hat, called Enviro+, comes from Pimoroni, which is pitching the add-on as a cheap alternative to expensive environmental monitoring stations. With an additional particulate matter sensor, the Pi-based air-monitoring device can be placed just...

“The Light Controller is a certified open source hardware development board for controlling 12 V RGB LED strips and reading data from I2C sensors for light, temperature, humidity and gesture detection.” The board, called ANAVI, can be...

The Gumstix RoomSense is a USB dongle board that can detect room occupancy using passive infrared (PIR) technology and report on temperature, humidity, and barometric conditions. The board can be customized in the Gumstix Geppetto online development...

Makers, developers, electronic enthusiasts and hobbyists waiting for the arrival of the BME680 sensor board from Bosch at the Adafruit online store will be pleased to know that the environmental sensing board is now available. Providing the ability to track...

  It detects humidity through two sensors which are to be used alternatively to let us know when there is water on the ground because it’s raining, or when the water level in a flowerpot is too...