- 3DRAG + MOTORFISH: How to prevent step losses in 3D printerPosted 3 weeks ago
- Motorfish: The stepper does not misses a step (the Firmware)Posted 4 weeks ago
- Motorfish: The stepper does not misses a stepPosted 4 weeks ago
- “Maker Faire Rome – The European edition” returns to the Gazometro OstiensePosted 3 months ago
- Single-chip saturation meterPosted 4 months ago
- Raspberry Pi Relay BoardPosted 5 months ago
- PCB CAD, A SELECTION GUIDEPosted 5 months ago
- Automatic dispenser for catsPosted 6 months ago
- Do you have a mask? RASPBERRY Pi SEES ITPosted 6 months ago
- RFID based Attendance system using Arduino and External EEPROMPosted 6 months ago
Simple DIY Weather Station w/ Raspberry Pi
Do you ever suddenly get the chills, so you check the temperature inside your room to make sure you’re not paranoid but then realize you don’t have any way to check? Or when the weather station’s predictions just seem too good to be true, so you double check the forecast for the nearest major city which doesn’t tell you anything about the weather directly around you?
Related Posts
One Comment
Leave a Reply
-
Arduino ISP (In System Programming) and stand-alone circuitsWe use an Arduino to program other ATmega without...
- Posted 10 years ago
-
-
-
GSM GPS shield for ArduinoShield for Arduino designed and based on the module...
- Posted 9 years ago
-
Small Breakout for SIM900 GSM ModuleSome post ago we presented a PCB to mount...
- Posted 11 years ago
-
3DRAG + MOTORFISH: How to prevent step losses in 3D printerIt solves the problem of pitch loss that can...
- Posted 3 weeks ago
-
Motorfish: The stepper does not misses a step (the Firmware)Let’s describe the firmware of the stepper motor feedback...
- Posted 4 weeks ago
-
Plexiglass parts and 3D printed containerSet containing all the LASER-cut plexiglass parts and the...
- Posted 4 weeks ago
-
Strip 144 LED NEOPIXEL length 1 meter – IP67Addressable light strip with144 high brightness, flexible and weatherproof...
- Posted 4 weeks ago
-
Arduino Mega ProtoshieldThis experimental board, made specifically for Arduino Mega, makes...
- Posted 4 weeks ago
Pingback: Simple DIY Weather Station w/ Raspberry Pi - Open Electronics - Amazonsearch.io