• FISHINO REV. 2 board

      Our Fishino boards are evolving, acquiring new and exciting features and functionalities. The renewal starts with UNO and MEGA. We are now going to explain to you what has changed.   In the previous article, we...

    • Posted 4 hours ago
    • 0
  • SuperB Open Source Module Adds Wifi and Bluetooth to Your Project

    The SuperB module is made by Macchina, the company that describes its product as the perfect marriage of two of hardware’s ubiquitous names : the Bee form factor and ESP32. In fact the SuperB module allow you to easily add...

    • Posted 2 days ago
    • 0
  • Convert Your Printrbot Play in a Mobile 3D Printer!

    Not content with a 3D printer that spends most of its life in a basement workshop or home office, the YouTuber Thomas Sanladerer decided to build a completely mobile 3D printer. He modified a small inexpensive unit to run on...

    • Posted 3 weeks ago
    • 0
  • Fishino (the board for IoT and wearable) meets Squirrel (part 2)

      Let’s get familiar with a programming language optimizing how we can write code for our Fishino boards, hosted on the board itself. Programming 32-bit Fishino boards can be an easy and light task by using specific...

    • Posted 3 months ago
    • 0
  • Fishino (the board for IoT and wearable) meets Squirrel (part 1)

      We introduce a programming language to optimize code for our Fishino boards. Part one. What do squirrels and our appreciated little fishes have in common? Very little apparently, but actually, as you will see by reading...

    • Posted 3 months ago
    • 0
  • Fishino goes in low-power mode

      Let’s optimize power consumption for our Arduino-like boards using specific hardware solutions and a dedicated software library.   We recently had many requests about solutions to reduce power consumption for our Fishino boards, particularly from those...

    • Posted 4 months ago
    • 0
  • Build Your LoRa Gateway with an Orange Pi Zero and RAK831

    The maker Edzelf recently open sourced his affordable LoRa gateway on Github. He combined a low-cost Orange Pi Zero with Rak wireless RAK831 concentrator module kit via a custom cable, and a power supply board, all assembled into a...

    • Posted 6 months ago
    • 1
  • How to Control Your GoPro Using the Arduino MKR1000

    If you have a HERO4 or HERO5 at home, thanks to their WiFi capabilities, with the proper programming you can use an Arduino sbc like the MKR1000 for control. The Maker Randy Sarafan was able to set up...

    • Posted 7 months ago
    • 0
  • FISH&GO! A WiFi Rover controlled by Blynk APP

      Based on the Fishino UNO board, a simple and funny project to join practicality and fun together. We are going to build a robot on wheels controlled from the “Blynk” app and we are going to...

    • Posted 8 months ago
    • 0
  • WiFi Audio Broadcaster

      In this article, we want to propose you what can be considered as the natural evolution of project Ethernet Broadcaster; the goal is still the same, i.e. allowing broadcasting of music or customizable audio messages. Besides...

    • Posted 8 months ago
    • 1
  • ModBerry M500 is the Raspberry Pi 3 Model B+ Based Automation Controller

    Techbase announced the availability of a new version of its ModBerry M500 industrial control computer, which advances from the Raspberry Pi 3 Model B to the new Raspberry Pi 3 Model B+ SBC. The updated ModBerry M500...

    • Posted 8 months ago
    • 0
  • Arduino Jumps Into the Next Generation IoT Boards: MKR Vidor 4000 and Uno Wi-Fi Rev 2

    Amongst a flurry of announcements at Maker Faire Bay Area, Arduino has introduced an easy-to-use FPGA board and a re-boot of Uno Wi-Fi, using a new ATmega processor. MKR Vidor 4000 is the first-ever Arduino board featuring...

    • Posted 9 months ago
    • 0
  • Arduino Announced The New MKR WiFi 1010 and MKR NB 1500 IoT Boards

    Arduino has announced two new IoT development boards with wireless connectivity: MKR WiFi 1010 and MKR NB 1500. Both of the new boards are fully compatible with the Arduino Uno, Mega and existing MKR boards. The MKR...

    • Posted 9 months ago
    • 0
  • i.MX 8M SOM and i.MX 8M Starter Kit (with Raspberry Pi header)

    Emcraft just launched a Linux-driven, i.MX 8M SOM module with onboard wireless plus a sandwich-style starter kit based on it that supplies GbE, HDMI 2.0, USB 3.0, USB Type-C, and RPi 40-pin connections. The i.MX8M SoC incorporates...

    • Posted 11 months ago
    • 0
  • Raspberry Pi Zero Drives a Remote Controlled Truck!

    Raspberry Pi enthusiasts may be interested in a new mini robot created by Omkar Joglekar. A Raspberry Pi Zero has been used to create a tiny remote controlled truck. Omkar has used a wireless dongle to add connectivity to...

    • Posted 1 year ago
    • 0
  • New Raspberry Pi Zero WH Launched with Pre-Soldered Headers

    The Raspberry Pi foundation has now launched a new model called Raspberry Pi Zero WH. What does ‘H’ mean? H means the 40-pin header is soldered. It can be more convenient for people who don’t own a soldering iron,...

    • Posted 1 year ago
    • 1
  • CubieTech’s Open Source SBCs: CubieAIO-S700 and CubieAIO-S500

    CubieTech’s two new CubieAIO sandwich style boards appeared on the CubieTech website earlier this month: the now shipping CubieAIO-S700, as well as a CubieAIO-S500, which does not yet appear to be for sale. Like the CubieAIO-A20 (an...

    • Posted 1 year ago
    • 0
  • ModBerry 500: Raspberry Pi CM3 based automation controller adds ESP32

    Techbase announced several enhancements to its Linux-driven ModBerry family of automation controllers, which are based on a variety of open source boards. First, the company is introducing a new version of its ModBerry 500 to add an...

    • Posted 1 year ago
    • 0