• ENERGY METER IOT

      Let’s interface our Energy Meter with Internet to bring measurements to the ThingSpeak platform and see the results in convenient graphs.   A few posts ago, we introduced the MCP39F511 integrated circuit, capable of performing electrical...

    • Posted 4 months ago
    • 0
  • Energy Meter GSM with Arduino (part 2)

      It monitors the electricity consumption and sends the detected data to the cloud through the GSM cellular network; it is based on an Arduino Mega equipped with GSM Shield and a board on which the measurement...

    • Posted 5 months ago
    • 0
  • Energy Meter GSM with Arduino (part 1)

      It monitors electricity consumption and sends the detected data to the cloud through the GSM cellular network; it is based on an Arduino Mega equipped with GSM Shield and an absorption detector board. First instalment.  ...

    • Posted 5 months ago
    • 0
  • How to build your Energy Load manager (part 2)

      When the instantaneous power consumption exceeds the set values, it selectively disconnects the users, in order to prevent the electric meter to cut the power to disconnect.    The management of the electricity users at home,...

    • Posted 4 years ago
    • 0
  • Energy meter: LOAD management

      It enables a selective disconnection of a maximum of 7 users, once the maximum power set is exceeded, and by selecting the priorities, so to disconnect the less important ones first. Supervising the electricity, intended as...

    • Posted 4 years ago
    • 2
  • Energy Meter module to analyze the electrical grid parameters and consumption: the software (part 2)

      In the first installment, you had the opportunity of learning about our energy meter, and of learning about its details, with special attention the technical ones. Our energy meter is based on the coupling – by...

    • Posted 4 years ago
    • 2
  • Energy Meter module to analyze the electrical grid parameters and consumption (part 1)

      Thanks to an innovative module, it analyses the electrical grid parameters and the consumption, by supplying them – via USB – to a computer, on which a dedicated software enables to display, collect and use the...

    • Posted 4 years ago
    • 3
  • Real-Time Energy Monitor with Arduino and LabVIEW

    We present the candidature of Mr. Michele Mancini for the TiDiGino Contest. He proposes us a recent application with Arduino: Real-Time Energy Monitor This is a simple power meter to analize the current consuming in a house...

    • Posted 11 years ago
    • 12