Don't miss

RASPBERRY PI turns into a tabletPosted 1 day ago
Open-electronics is ready to listen you!Posted 4 days ago
Signet: Physical security for your passwords and personal dataPosted 5 days ago
Emlid introduces Edge – Advanced drone controller with HDMI video input and 5.8GHz data linkPosted 5 days ago
Time of Flight technology: a Proximity laser sensorPosted 6 days ago
Open-Electronics Channel on TelegramPosted 1 week ago
Open-Electronics.org is now on LinkedinPosted 2 weeks ago
Amazing interview with Naomi ‘SexyCyborg’ WuPosted 2 weeks ago
An electronic business card on a boardPosted 3 weeks ago
Here comes ARDUINO PRIMO: a deeper lookPosted 3 weeks ago

Italian FABtotum is the most successful European crowdfunding Campaign

By Staff on October 31, 2013

Fabtotum personal Fabricator, the Italian project we interviewed few weeks ago, closed its Kickstarter campaign with more almost $600k representing the most successful campaign in Europe so far:

Over 900 funders contributed for almost $600k, more than 1000 interactions from emails to comments, a metric ton of articles and press coverage for a project that wanted to humbly change the 3d printing paradigm.

via FABtotum Personal Fabricator | Indiegogo.

Fabtotum indiegogo

About Staff

Pingback: Hardware Accelerator Industrio Ventures Presents new 2014 Application | Open Electronics()

OpenSource Products

RASPBERRY PI turns into a tablet
Let’s create a portable touchscreen all-in-one PC, to be...
- Posted 1 day ago
- 0
Time of Flight technology: a Proximity laser sensor
Based on Time of Flight technology, the module provides...
- Posted 6 days ago
- 0
An electronic business card on a board
How to make an electronic business...
- Posted 3 weeks ago
- 0
Here comes ARDUINO PRIMO: a deeper look
Here comes a new board for prototype creation of...
- Posted 3 weeks ago
- 0

Tutorials

A Guide to Arduino Based Video Camera
Recently, all modern laptops, smartphones, and tablets come with built-in...
- Posted 1 month ago
- 1
Discovering OpenSCAD – part 2: advanced functions
Here we complete the overview of the free 3D...
- Posted 1 year ago
- 1
Discovering OpenSCAD – part 1: basic functions
Who prints 3D objects needs a 3D modeling and editing software to create and edit files; a good example is OpenSCAD,...
- Posted 1 year ago
- 0
How to evaluate a Stereo Lithographic 3D Printers
Introduction In this short document by RobotFactory, we will...
- Posted 2 years ago
- 1

Mods and Hacks

Here are the Winners from the 3Drag 3d printing contest
Here we are, eventually the contest has come to an...
- Posted 3 years ago
- 0
Updates from the 3Drag 3dprinting contest: Roland Hoffert’s Hacks
Roland Hoffert, from www.eytec.de, submitted us this 3Drag (Velleman K8200...
- Posted 3 years ago
- 0
Updates from the 3Drag 3dprinting contest: Karl Seiss’s Hack
Karl Seiss from Austria made a very clever hack to...
- Posted 3 years ago
- 0
Updates from the 3Drag 3dprinting contest: Fa)(a from Giacomo Falaschi
Giacomo Falaschi sent us his Falla3D new printer project: you...
- Posted 3 years ago
- 0

Opinions

10 Most Funded Crowdfunded Projects
New tech is developed and released every day. Our global...
- Posted 1 month ago
- 0
Which is the best (open source) 3D printer?
3D printing is being part of our lives and we’re...
- Posted 1 year ago
- 5
Happy Open Year! Top 10 OpenSource projects
A new year started, leving behind a 2015 rich in...
- Posted 2 years ago
- 2
What is “open source”? What’s “open hardware”? What does it mean to be open, and above all, why so?
It is undeniable that the 4th industrial revolution is sweeping...
- Posted 2 years ago
- 2

Popular
Latest
Comments

Arduino GSM shield
...
- Posted 7 years ago
- 217
Arduino ISP (In System Programming) and stand-alone circuits
We use an Arduino to program other ATmega without...
- Posted 6 years ago
- 217
Localizer with SIM908 module
The device is based on a GSM/GPRS module with...
- Posted 5 years ago
- 185
GSM GPS shield for Arduino
Shield for Arduino designed and based on the module...
- Posted 5 years ago
- 180
Small Breakout for SIM900 GSM Module
Some post ago we presented a PCB to mount...
- Posted 6 years ago
- 115

LimeSDR Mini: Low-Cost, Small Size and Entirely Open Source Board
Lime Microsystems has unveiled a size- and cost-reduced variant...
- Posted 18 hours ago
- 0
RASPBERRY PI turns into a tablet
Let’s create a portable touchscreen all-in-one PC, to...
- Posted 1 day ago
- 0
Scout: the 3D Printed Drone that Fascinates the Marine Corps
A prototype drone known as Scout that can be successfully manufactured...
- Posted 2 days ago
- 0
Professional NEC displays: you can now integrate Raspberry Pi and Ubuntu Core
NEC Display Solutions Europe has announced a collaboration with Canonical Screenly . The...
- Posted 3 days ago
- 0
How To Convert Your Raspberry Pi to a Smart Remote Control
The Anavi Infrared pHAT is designed for creating IR-controller...
- Posted 4 days ago
- 0

Michael Bauer says:

Note: The MRF24J40 module does not support Wi...
Charles Matthew Taylor II says:

will this software totally wipe out my pi3 or...
Hesam Mahdinejad says:

Could you ship the product to UAE? How long d...
Jeff2Space says:

Why would the add on board need a mini-HDMI p...
Al says:

clicks when you press it - and then leaves yo...

About us

Open-Electronics.org is the brainchild of a world leader in hobby electronics Futura Group srl.
Open-Electronics.org is devoted to support development, hacking and playing with electronics: we share exciting open projects and create amazing products!

Open-Electronics.org is not just a container of ideas: it is also a web site lead by a team of engineers and geeks who will take part in the discussions and give support.

Our mission is to become a reference Open Source hacking site with ideas and feedback aimed to enrich the community.