- Terminus FE1.1 USB hub board: the solution to connect four USB devicesPosted 4 days ago
- Understanding the Mechanics of 3D PrintingPosted 2 months ago
- SDS011 the Air Quality SensorPosted 3 months ago
- NIXIE STYLE LED DISPLAYPosted 6 months ago
- TOTEM: learning by experimentingPosted 6 months ago
- Google Assistant Voice Controlled Switch – NodeMCU IOT ProjePosted 7 months ago
- Water Softener Salt Level MonitorPosted 7 months ago
- Sparkly Air SensorPosted 7 months ago
- Ultra sonic distance finder with live statusPosted 7 months ago
- Windows interface to have total control over lampsPosted 7 months ago
-
Fishino Ir Remote
Let’s combine the Fishino UNO power with the convenience of Google Home voice assistants, so that we can forget about the remote control and manage various devices with simple phrases. With this project, we are going to...
- Posted 2 years ago
-
Bluetooth Controlled Raspberry Pi Rover
Here we go! This is a very programming-heavy project, but I think it has a pretty good reason to be. The Evdev library that we use doesn’t have a lot of resources on reading from analog sticks,...
- Posted 3 years ago
-
Secure DIY Garage Door Opener
We are going to use digital signatures to add security to our system. If you want to learn more about how to use the Cryptographic Co-processor, check out this tutorial and video. These will show you the fundamental ideas...
- Posted 3 years ago
-
Antennino: The arduino with an antenna – Low Power and OTA programming
Let’s start using our IoT boards based on Arduino architecture. In our previous posts, we presented Antennino, a special Arduino board with connectivity functionalities, capable of operating in Peripheral or Gateway mode. We stopped at the...
- Posted 4 years ago
-
Antennino: the low-power Arduino with Antenna – The Bootloader
Let’s discover how to load the bootloader on our IoT board, so to prepare it for the usage. You learned about Antennino when reading the first part of this article, in which we presented the...
- Posted 4 years ago
-
Antennino: the low-power Arduino with Antenna
A multirole board, that stands out for its very low energy consumption and the possibility to be remotely programmed, emerges in the rich landscape of the IoT modules. When talking about IoT, we usually refer to devices...
- Posted 4 years ago
-
LoRa remote control
Palmtop transmitter to couple with the LoRa Shield to execute longer-range radio commands. Among the longer distance radio transmission technologies with low energy consumption, there was one in particular on which we have focused our attention,...
- Posted 5 years ago