Home   >   News   >   Stratasys Automotive and Entertainment Forums – 7th-8th June in Los Angeles

Stratasys Automotive and Entertainment Forums – 7th-8th June in Los Angeles

By on May 17, 2016
Pin It

Stratasys announces its Automotive and Entertainment forum in June, 7th-8th Los Angeles (CA). You can register here if interested.

In the same event, it would be possible to see two of the most impressive 3d printer that Stratasys makes for the professional market: the J750 printer and the Objet1000 plus.

Stratasys J750 is the ultimate full-color, multi-material 3D printer model released by the north american 3d printing leader.

Stratasys J750 3D Printer

Download the Stratasys J750 spec sheet.

Model Materials

  • Vero family of opaque materials including neutral shades and vibrant colors
  • Tango family of flexible materials
  • Transparent VeroClear and RGD720

Digital Materials

Unlimited number of composite materials including:

  • Over 360,000 colors
  • Digital ABS and Digital ABS2 in ivory and green
  • Rubber-like materials in a variety of Shore A values
  • Translucent color tints

Support Materials
SUP705 (WaterJet removable)

Build Size
490 x 390 x 200 mm (19.3 x 15.35 x 7.9 in.)

Layer Thickness
Horizontal build layers down to 14 microns (0.00055 in.)

Workstation Compatibility
Windows 7 and 8.1 64 bit

Network Connectivity
LAN – TCP/IP

System size and Weight

3D Printer:
1400 x 1260 x 1100 mm (55.1 x 49.6 x 43.4 in.); 430 kg (948 lbs.)

Material Cabinet:
670 x 1,170 x 640 mm (26.4 x 46.1 x 25.2 in.); 152 kg (335 lbs.)

Operating Conditions
Temperature 18-25 °C (64-77 °F); relative humidity 30-70% (non-condensing)

Power Requirements

  • 100–120 VAC, 50–60 Hz, 13.5 A, 1 phase
  • 220–240 VAC, 50–60 Hz, 7 A, 1 phase

Regulatory Compliance
CE, FCC, EAC

Software
PolyJet Studio 3D Printing Software

Build Modes

  • High Speed: up to 3 base resins, 27-micron (0.001 in.) resolution
  • High Quality: up to 6 base resins, 14-micron (0.00055 in.) resolution
  • High Mix: up to 6 base resins, 27-micron (0.001 in.) resolution

Accuracy
20-85 microns for features below 50 mm; up to 200 microns for full model size (for rigid materials only)

Resolution

  • X-axis: 600 dpi
  • Y-axis: 600 dpi
  • Z-axis: 1800 dpi

With an ultra-large build tray measuring 1000 x 800 x 500 mm (39.3 x 31.4 x 19.6 in.), the Objet1000 Plus amplifies productivity without sacrificing accuracy. It works largely unattended to produce multi-material parts directly from CAD data, preserving fine details and geometric complexity at any scale.

In industries like automotive and aerospace, the Objet1000 Plus streamlines production of 1:1 models, patterns, molds, fixtures and other manufacturing tools. It’s up to 40 percent faster than its predecessor, and offers the lowest cost of ownership per part of any PolyJet system. Its size, speed and precision amount to higher throughput, lower cost per part – and ultimately a quick return on investment.

Objet1000 Plus closed machine

Download the Objet1000 Plus spec sheet.

Model materials

  • Rigid Opaque: Vero family
  • Rubber-like: TangoPlus and TangoBlackPlus
  • Transparent: VeroClear
  • Simulated Polypropylene (Rigur)

Digital Materials:

  • Digital ABS and Digital ABS2
  • Wide range of translucencies
  • Rubber-like blends in a range of Shore A values
  • Simulated Polypropylene materials with improved heat resistance

Support material:
FullCure 705 non-toxic gel-like photopolymer support

Material cartridges:

  • Six sealed 18 kg (39.6 lb) cartridges
  • Two different model materials loaded
  • Hot-swappable replacement during print

Net build size:
1000 x 800 x 500 mm (39.3 x 31.4 x 19.6 in.)

Layer thickness:
Horizontal build layers as fine as 16 microns (.0006 in.)

Build resolution:
X-axis: 300 dpi; Y-axis: 300 dpi; Z-axis: 1600 dpi

Printing modes:

  • Digital Material (DM): 34-micron (0.001 in.)
  • High Quality (HQ): 16-micron (0.0006 in.)
  • High Speed (HS): 34-micron (0.001 in.)

Accuracy:
Up to 85 microns for features smaller than 50mm; Up to 600 microns for full model size (for rigid materials only, depending on geometry, build parameters and model orientation)

Input Format:
STL, OBJDF and SLC File

Workstation compatibility:
Integrated Windows 7 64 bit and Windows 8

Network connectivity:
LAN – TCP/IP

Size and weight:
Height: 1960 mm (77.5 in.)
Width: 2868 mm (113 in.)
Depth: 2102 mm (83 in.)
Weight: 2200 kg (4850 lbs.)

Print heads:
8 units

OpenStore

About Luca Ruggeri

Leave a Reply

Your email address will not be published. Required fields are marked *