- How to Build a 1000W ZVS Induction Heater Using a Resonant RLC CircuitPosted 1 week ago
- How to Adjust X and Y Axis Scale in Arduino Serial Plotter (No Extra Software Needed)Posted 10 months ago
- Elettronici Entusiasti: Inspiring Makers at Maker Faire Rome 2024Posted 10 months ago
- makeITcircular 2024 content launched – Part of Maker Faire Rome 2024Posted 12 months ago
- Application For Maker Faire Rome 2024: Deadline June 20thPosted 1 year ago
- Building a 3D Digital Clock with ArduinoPosted 2 years ago
- Creating a controller for Minecraft with realistic body movements using ArduinoPosted 2 years ago
- Snowflake with ArduinoPosted 2 years ago
- Holographic Christmas TreePosted 2 years ago
- Segstick: Build Your Own Self-Balancing Vehicle in Just 2 Days with ArduinoPosted 2 years ago
3D Printing with Marble Powder (for quarry waste reuse)
Another groundbreaking Italian project in 3Dprinting (seen at Rome Maker Faire).
Our mission is to reutilize the waste material resulting from the marbles production process. Sludge and waste are a consequence of the production system, this marble dust is complex and expensive to dispose of. But if mixed with special resins and catalysed with UV rays, these substances can be brought back to a new life and transformed in raw material ideal for 3D printing, with technically no use limitations, from architecture to design, from art and fashion to industrial purposes. This technology is capable of transforming ideas in real enviro
see: http://www.marbleecodesign.com/
Related Posts
){kind=link}
-
Arduino ISP (In System Programming) and stand-alone circuitsWe use an Arduino to program other ATmega without...
- Posted 13 years ago
-
-
-
GSM GPS shield for ArduinoShield for Arduino designed and based on the module...
- Posted 13 years ago
-
Small Breakout for SIM900 GSM ModuleSome post ago we presented a PCB to mount...
- Posted 14 years ago
-
How to Build a 1000W ZVS Induction Heater Using a Resonant RLC CircuitLet’s Melt Metals Using the ZVS (Zero Voltage Switching)...
- Posted 1 week ago
-
How to Control NeoPixel Installations via Wi-Fi Using Fishino and NodeMCU with PythonWe create NeoPixel light installations with Fishino and NodeMCU...
- Posted 8 months ago
-
How to Adjust X and Y Axis Scale in Arduino Serial Plotter (No Extra Software Needed)The Serial Plotter in Arduino is an excellent tool...
- Posted 10 months ago
-
Elettronici Entusiasti: Inspiring Makers at Maker Faire Rome 2024Maker Faire Rome 2024 is ready to amaze the...
- Posted 10 months ago
-
makeITcircular 2024 content launched – Part of Maker Faire Rome 2024Applications to MakeITcircular must be in by October 3,...
- Posted 12 months ago