- Efficient and Compact Stereo Power Amplifier: Unleash High-Quality Audio with the PAM8610Posted 5 hours ago
- Terminus FE1.1 USB hub board: the solution to connect four USB devicesPosted 3 months ago
- Understanding the Mechanics of 3D PrintingPosted 4 months ago
- SDS011 the Air Quality SensorPosted 5 months ago
- NIXIE STYLE LED DISPLAYPosted 9 months ago
- TOTEM: learning by experimentingPosted 9 months ago
- Google Assistant Voice Controlled Switch – NodeMCU IOT ProjePosted 9 months ago
- Water Softener Salt Level MonitorPosted 10 months ago
- Sparkly Air SensorPosted 10 months ago
- Ultra sonic distance finder with live statusPosted 10 months ago
-
Arduino Sensorless Electronic Speed Controller
If you’re dealing with brushless motors, you can be interested in this brushless speed controller by Electronoobs. Version 1.0 of his open-source ESC design has been just released. This is a sensorless brushless motor speed controller since...
- Posted 4 years ago
-
DIY an Arduino-based 5 in 1 Multimeter Device
YouTuber Electronoobs has just created an Arduino Nano multimeter device. Using a small OLED screen in combination with the Arduino Nano together with a couple of buttons and 16-bit ADC for precise measurements the multimeter is able...
- Posted 4 years ago
-
Romeo BLE: the Arduino Control Board for your Robot
Romeo family is an All-in-One Arduino based control board especially designed for robotics applications from DFRobot. It benefits from the Arduino open source platform and it is supported by thousands of open source codes. The Romeo BLE has...
- Posted 6 years ago
-
DIY an Arduino Scanning Thermometer
Using an Arduino Nano and two rotary stages, this Maker hacked together a panoramic thermal imaging camera. After ordering and finally receiving an infrared thermometer in the mail, the author of this project set to work to...
- Posted 6 years ago
-
ArduEcu: the groundbreaking waterproof and rugged Arduino ECU
ArduECU is an IP69K-rated waterproof, rugged and impact-resistant electronic control unit (ECU) based on an ATmega328. The ECU can be programmed with the Arduino IDE and also supports CoDeSys, meaning you can now configure your ArduECU with...
- Posted 6 years ago
-
Arduino clone NerO delivers power punch via Kickstarter
FTDI Chip is using Kickstarter to fund an open source reference design for an Arduino UNO compatible board. The NerO is based on the company’s FT231X USB UART, and delivers 5V at 1A without overheating. It is...
- Posted 7 years ago
-
The perfect Beer with Arduino: OpenArdBir project
The project Open Ardbir is largely inspired by the original project formerly Braudino from Stephen Mathison and then upgraded and modified by Mike Wilson under the Mike’s Brewery appellation and is been completely reviewed by Max Nevi...
- Posted 8 years ago