Don't miss
- makeITcircular 2024 content launched – Part of Maker Faire Rome 2024Posted 2 months ago
- Application For Maker Faire Rome 2024: Deadline June 20thPosted 3 months ago
- Building a 3D Digital Clock with ArduinoPosted 8 months ago
- Creating a controller for Minecraft with realistic body movements using ArduinoPosted 9 months ago
- Snowflake with ArduinoPosted 9 months ago
- Holographic Christmas TreePosted 9 months ago
- Segstick: Build Your Own Self-Balancing Vehicle in Just 2 Days with ArduinoPosted 10 months ago
- ZSWatch: An Open-Source Smartwatch Project Based on the Zephyr Operating SystemPosted 10 months ago
- What is IoT and which devices to usePosted 11 months ago
- Maker Faire Rome Unveils Thrilling “Padel Smash Future” Pavilion for Sports EnthusiastsPosted 11 months ago
Atomic Tumbler an OpenSource DIY Tumbler from Fablab Torino
By Staff on July 3, 2013
Atomic tumbler is a machine for the tumbling realized through laser cutting and printing 3d, to obtain polished pieces outside of the industrial production.
via Atomic Tumbler – Burattatrice DIY | Fablab Torino.
Fantastic low fi / low tech project, here you can find the complete guide: http://www.fablabtorino.org/wp-content/uploads/2013/06/tutorialatomictumbler.pdf
Related Posts
-
Arduino ISP (In System Programming) and stand-alone circuitsWe use an Arduino to program other ATmega without...
- Posted 12 years ago
-
-
-
GSM GPS shield for ArduinoShield for Arduino designed and based on the module...
- Posted 12 years ago
-
Small Breakout for SIM900 GSM ModuleSome post ago we presented a PCB to mount...
- Posted 13 years ago
-
makeITcircular 2024 content launched – Part of Maker Faire Rome 2024Applications to MakeITcircular must be in by October 3,...
- Posted 2 months ago
-
SONY color camera module, 700 TV LinesColor camera module equipped with a 1/3″ CCD sensor...
- Posted 2 months ago
-
ESP32 Low Power ModuleESP32 Low Power Module, based on Espressif’s SoC capable...
- Posted 3 months ago
-
-
Application For Maker Faire Rome 2024: Deadline June 20thLearn More About the Ideas, Makers + Projects at...
- Posted 3 months ago