fingerprint lock | Open Electronics

Don't miss

Arduino Fingerprint Door Locking System
Last year I’ve made two door lock projects. One was the keypad project and the second one was an RFID door lock project each with a 3D printed case and a servo to open the door. Today...
- Posted 9 months ago
- 0
An Interesting Tamper-Proof Arduino System for Your Garage
Using an Arduino Micro for control, the instructables user Joebarteam came up with a way to biometrically secure his garage. What could be better than using your fingerprint to unlock your garage? To this end, Joe’ came up with...
- Posted 2 years ago
- 0

Robot Arm with Pick & PLACE part 2
We equip the robotic arm published in the previous...
- Posted 2 weeks ago
- 0
ELECTRIC SOLDERING SET
Laboratory set for soldering electronic boards and components. Everything you...
- Posted 3 weeks ago
- 0
Pick & Place for Robotic Arm “ROBOARM”
Consisting of a small vacuum pump, a solenoid valve, a...
- Posted 3 weeks ago
- 0
Aluminum heat sink with 12 volt fan
Aluminum heat sink with 12 volt fan and 0.1 A...
- Posted 3 weeks ago
- 0
Neopixel 16X16 LED Panel WS2812B – Flexible
Combined with Arduino, Fishino, Raspberry or other microcontroller, this flexible...
- Posted 4 weeks ago
- 0

PCB CAD, A SELECTION GUIDE
Getting to know and evaluate the software offer for PCB,...
- Posted 5 months ago
- 0
The world of GIThub
Let’s learn all the aspects of the most renowned...
- Posted 8 months ago
- 0
Let’s manage a project from A to… GIT
Let’s learn about the firmware management and versioning tool...
- Posted 8 months ago
- 0

Here are the Winners from the 3Drag 3d printing contest
Here we are, eventually the contest has come to an...
- Posted 5 years ago
- 0
Updates from the 3Drag 3dprinting contest: Roland Hoffert’s Hacks
Roland Hoffert, from www.eytec.de, submitted us this 3Drag (Velleman K8200...
- Posted 5 years ago
- 0
Updates from the 3Drag 3dprinting contest: Karl Seiss’s Hack
Karl Seiss from Austria made a very clever hack to...
- Posted 5 years ago
- 0
Updates from the 3Drag 3dprinting contest: Fa)(a from Giacomo Falaschi
Giacomo Falaschi sent us his Falla3D new printer project: you...
- Posted 5 years ago
- 0

The end of the Makers movement? What happened at Maker Media?
Big financial problems for Maker Media that blocked...
- Posted 6 days ago
- 0
An innovative solution in the blockchain market: 25MB Block Size – can it be real?
Sponsored post by ILCoin In the past 10...
- Posted 1 month ago
- 0
PCB CAD, A SELECTION GUIDE
Getting to know and evaluate the software offer for PCB,...
- Posted 5 months ago
- 0
RISC-V, THE ERA OF OPEN SOURCE CPU HAS BEGUN
Open architectures for processors too? It looks like it...
- Posted 6 months ago
- 1

Arduino ISP (In System Programming) and stand-alone circuits
We use an Arduino to program other ATmega without...
- Posted 7 years ago
- 224
Arduino GSM shield
This is a very low...
- Posted 8 years ago
- 218
Localizer with SIM908 module
The device is based on a GSM/GPRS module with...
- Posted 7 years ago
- 185
GSM GPS shield for Arduino
Shield for Arduino designed and based on the module...
- Posted 7 years ago
- 180
Small Breakout for SIM900 GSM Module
Some post ago we presented a PCB to mount...
- Posted 8 years ago
- 115

MCC 134 Thermocouple Measurement HAT for Raspberry Pi
The MCC 134 Thermocouple Measurement HAT provides four thermocouple...
- Posted 2 hours ago
- 0
LPS35HW Water Resistant Pressure Sensor Now Available on Adafruit
The ST LPS35HW is a water resistant barometric pressure...
- Posted 1 day ago
- 0
“MakerArt” an innovative project of synergistic pathways between international makers and artists
. It’s called Maker Art and it’s one of the...
- Posted 2 days ago
- 0
The RadioInstigator is an Affordable Signals Intelligence Platform
Circle City Con is a yearly conference that focuses...
- Posted 2 days ago
- 0
EVSE “BATTERY CHARGER” for electric cars
Let’s take a closer look to battery chargers...
- Posted 3 days ago
- 0