Arduino Buzzer/Light Temperature Alert Hat Prototype

By Emanuele Signoretta on December 12, 2019

If you are in trouble with hot temperatures you can’t miss this DIY gadget, an Arduino-powered buzzer and led alert hat. While temperature increases leds change temperature from green to red and when it’s very hot a buzzer begins to play.

More info

About Emanuele Signoretta

Studying electronics and communication engineering at Politecnico di Torino. Electronics, IT and Open Source enthusiast.

OpenSource Products

GSM modem with USB
We make a device that allows GPRS connectivity via...
- Posted 6 months ago
- 0
GPS L80-R module with antenna
66-channel GPS receiver module with patch antenna, UART interface: 4800-115.200bps...
- Posted 6 months ago
- 0
1D and 2D Barcode reader module
Compact and high-performance module capable of reading linear (Code 39,...
- Posted 6 months ago
- 0
128×64 OLED display – white characters
Module with 2.42″, 128×64 pixel OLED (Organic Light Emitting Diode)...
- Posted 6 months ago
- 0
3.5inch Touch LCD Shield for Arduino
Shield for Arduino Uno consisting of a TFT LCD display...
- Posted 6 months ago
- 0
Fingerprint reader with AS608 chip
Optical fingerprint reader, equipped with high-speed DSP processor, high-performance recognition...
- Posted 6 months ago
- 0
DC12V 15W LED COB Light Strip – length 20 cm
Bar with red COB LEDs covered with silicone rubber and...
- Posted 6 months ago
- 0
DC12V 15W LED COB Light Strip – length 20 cm
Bar with green COB LEDs covered with silicone rubber and...
- Posted 6 months ago
- 0

Mods and Hacks

Here are the Winners from the 3Drag 3d printing contest
Here we are, eventually the contest has come to an...
- Posted 6 months ago
- 0
Updates from the 3Drag 3dprinting contest: Roland Hoffert’s Hacks
Roland Hoffert, from www.eytec.de, submitted us this 3Drag (Velleman K8200...
- Posted 6 months ago
- 0
Updates from the 3Drag 3dprinting contest: Karl Seiss’s Hack
Karl Seiss from Austria made a very clever hack to...
- Posted 6 months ago
- 0
Updates from the 3Drag 3dprinting contest: Fa)(a from Giacomo Falaschi
Giacomo Falaschi sent us his Falla3D new printer project: you...
- Posted 6 months ago
- 0

Opinions

The Open Source community united against Covid-19
On March 11, WHO (World Health Organization) officially declared the...
- Posted 6 months ago
- 0
Coronavirus: Now Is The Time For Solidarity
The moment we are living, in China before and all...
- Posted 6 months ago
- 0
5 Types of Industrial Flowmeter
In an industrial setting, the use of flow meters...
- Posted 6 months ago
- 0
The Best Gadgets for Seniors That Will Help Improve Their Everyday Lives
The majority of adults would, for the most part, rather...
- Posted 6 months ago
- 0

Popular
Latest
Comments

Arduino ISP (In System Programming) and stand-alone circuits
We use an Arduino to program other ATmega without...
- Posted 6 months ago
- 0
Arduino GSM shield
This is a very low...
- Posted 6 months ago
- 0
Localizer with SIM908 module
The device is based on a GSM/GPRS module with...
- Posted 6 months ago
- 0
GSM GPS shield for Arduino
Shield for Arduino designed and based on the module...
- Posted 6 months ago
- 0
Small Breakout for SIM900 GSM Module
Some post ago we presented a PCB to mount...
- Posted 6 months ago
- 0

Creality CR-6 SE Leveling-free DIY 3D Printer Kit
From printing urgently needed medical equipment to cater to...
- Posted 6 months ago
- 0
Request Sensor Data via SMS using Arduino and SIM900 GSM Shield
In this project we’re going to show you...
- Posted 6 months ago
- 0
FotoFish
FotoFish is a polaroid camera project, which uses...
- Posted 6 months ago
- 0
This SpaceX fan created a levitating Starship lamp
Although you might not be able to build or house...
- Posted 6 months ago
- 0
Monitor your home with this Nano 33 IoT-based system
Using an Arduino Nano 33 IoT, Jithin Sanal designed...
- Posted 6 months ago
- 0