Don't miss
- 3DRAG + MOTORFISH: How to prevent step losses in 3D printerPosted 3 weeks ago
- Motorfish: The stepper does not misses a step (the Firmware)Posted 4 weeks ago
- Motorfish: The stepper does not misses a stepPosted 4 weeks ago
- “Maker Faire Rome – The European edition” returns to the Gazometro OstiensePosted 3 months ago
- Single-chip saturation meterPosted 4 months ago
- Raspberry Pi Relay BoardPosted 5 months ago
- PCB CAD, A SELECTION GUIDEPosted 5 months ago
- Automatic dispenser for catsPosted 6 months ago
- Do you have a mask? RASPBERRY Pi SEES ITPosted 6 months ago
- RFID based Attendance system using Arduino and External EEPROMPosted 6 months ago
UV disinfection robot
By Carlo Palumbo on March 31, 2021
Here we are creating the Robot called UV disinfection robot . This remotely controlled robot also contains extra safety features like collision avoidance and human exposure. This robot is 1.5 meter long.
Related Posts
-
Arduino ISP (In System Programming) and stand-alone circuitsWe use an Arduino to program other ATmega without...
- Posted 10 years ago
-
-
-
GSM GPS shield for ArduinoShield for Arduino designed and based on the module...
- Posted 9 years ago
-
Small Breakout for SIM900 GSM ModuleSome post ago we presented a PCB to mount...
- Posted 11 years ago
-
3DRAG + MOTORFISH: How to prevent step losses in 3D printerIt solves the problem of pitch loss that can...
- Posted 3 weeks ago
-
Motorfish: The stepper does not misses a step (the Firmware)Let’s describe the firmware of the stepper motor feedback...
- Posted 4 weeks ago
-
Plexiglass parts and 3D printed containerSet containing all the LASER-cut plexiglass parts and the...
- Posted 4 weeks ago
-
Strip 144 LED NEOPIXEL length 1 meter – IP67Addressable light strip with144 high brightness, flexible and weatherproof...
- Posted 4 weeks ago
-
Arduino Mega ProtoshieldThis experimental board, made specifically for Arduino Mega, makes...
- Posted 4 weeks ago
