squirrel | Open Electronics

Don't miss

Fishino (the board for IoT and wearable) meets Squirrel (part 2)
Let’s get familiar with a programming language optimizing how we can write code for our Fishino boards, hosted on the board itself. Programming 32-bit Fishino boards can be an easy and light task by using specific...
- Posted 3 months ago
- 0
Fishino (the board for IoT and wearable) meets Squirrel (part 1)
We introduce a programming language to optimize code for our Fishino boards. Part one. What do squirrels and our appreciated little fishes have in common? Very little apparently, but actually, as you will see by reading...
- Posted 3 months ago
- 0

IR module
IR LED module equipped with four infrared diode emitters activated...
- Posted 4 days ago
- 0
FISHINO REV. 2 board
Our Fishino boards are evolving, acquiring new and exciting...
- Posted 5 days ago
- 0
Raspberry Pi 3 Model B+
<!–cke_bookmark_155S–><!–cke_bookmark_155E–> The...
- Posted 5 days ago
- 0
Board with DHT11 temperature and humidity sensor
Based on the DHT11 sensor, this...
- Posted 5 days ago
- 0
FruitNanny: The electronic guardian
The electronic guardian who watches over our baby’s rest...
- Posted 5 days ago
- 0

PCB CAD, A SELECTION GUIDE
Getting to know and evaluate the software offer for PCB,...
- Posted 1 month ago
- 0
The world of GIThub
Let’s learn all the aspects of the most renowned...
- Posted 4 months ago
- 0
Let’s manage a project from A to… GIT
Let’s learn about the firmware management and versioning tool...
- Posted 4 months ago
- 0

Here are the Winners from the 3Drag 3d printing contest
Here we are, eventually the contest has come to an...
- Posted 4 years ago
- 0
Updates from the 3Drag 3dprinting contest: Roland Hoffert’s Hacks
Roland Hoffert, from www.eytec.de, submitted us this 3Drag (Velleman K8200...
- Posted 4 years ago
- 0
Updates from the 3Drag 3dprinting contest: Karl Seiss’s Hack
Karl Seiss from Austria made a very clever hack to...
- Posted 4 years ago
- 0
Updates from the 3Drag 3dprinting contest: Fa)(a from Giacomo Falaschi
Giacomo Falaschi sent us his Falla3D new printer project: you...
- Posted 4 years ago
- 0

PCB CAD, A SELECTION GUIDE
Getting to know and evaluate the software offer for PCB,...
- Posted 1 month ago
- 0
RISC-V, THE ERA OF OPEN SOURCE CPU HAS BEGUN
Open architectures for processors too? It looks like it...
- Posted 2 months ago
- 1
Things You Didn’t Know Could Be Open Source
There are a number of different factors that led...
- Posted 1 year ago
- 0
10 Most Funded Crowdfunded Projects
New tech is developed and released every day. Our global...
- Posted 2 years ago
- 0

Arduino ISP (In System Programming) and stand-alone circuits
We use an Arduino to program other ATmega without...
- Posted 7 years ago
- 224
Arduino GSM shield
This is a very low...
- Posted 8 years ago
- 218
Localizer with SIM908 module
The device is based on a GSM/GPRS module with...
- Posted 7 years ago
- 185
GSM GPS shield for Arduino
Shield for Arduino designed and based on the module...
- Posted 6 years ago
- 180
Small Breakout for SIM900 GSM Module
Some post ago we presented a PCB to mount...
- Posted 8 years ago
- 115

TWIST: Open Source DIY Tweeting Weather Station
Aptly named TWIST the open source environmental monitoring system...
- Posted 2 days ago
- 0
Deep learning may need a new programming language
Deep learning may need a new programming language that...
- Posted 2 days ago
- 0
Bookworm: A Simple, Focused EBook Reader
1. Toggle between a grid view and a list...
- Posted 2 days ago
- 0
Zeplin (YC S15) Is Hiring a Customer Support Engineer
We care deeply about how we interact with our...
- Posted 2 days ago
- 0
A Hello World app in React 2.1.5 has 1,568 dependencies spanning 1.1M LOC
When I write tweets like this, some read it...
- Posted 2 days ago
- 0