simcom | Open Electronics

Don't miss

LTE NB-IoT Open-Source Arduino Shield with CAT-M & GNSS
An open-source LTE shield equipped with SIMCOM’s SIM7000-series modules combined with the latest LTE CAT-M technology has been created by Hackaday member Timothy Woo to enable Arduino users to easily connect low-power Internet of Things devices to next-generation cellular technology. “With the emergence...
- Posted 1 year ago
- 0
AT Command Tester: New version of the free online software tool to test GSM modules
Developing firmware for AT-based GSM/GPS modules is a big bottleneck for software development due to the many problems intrinsic to AT-based programming style and the many challenges in dealing with manufacturer specific AT command set....
- Posted 2 years ago
- 0

ROBOTIC Arm in plexiglass part 1
We create our first robotic arm with four degrees...
- Posted 1 day ago
- 0
Switching-mode power supply 350W 12V
Laboratory power supply in high efficiency switching technology. Metal case,...
- Posted 2 days ago
- 0
Heated plate in aluminum for 3D printer
Made of aluminum with a thickness of 3 mm this...
- Posted 2 days ago
- 0
Camera module 8 Megapixel for Raspberry Pi
Small module for Raspberry Pi with 8-megapixel Sony IMX219PQ image...
- Posted 5 days ago
- 0
NODE MCU ESP8266
Based on the ESP8266 Wi-Fi transceiver module and the CP2102...
- Posted 5 days ago
- 0

PCB CAD, A SELECTION GUIDE
Getting to know and evaluate the software offer for PCB,...
- Posted 4 months ago
- 0
The world of GIThub
Let’s learn all the aspects of the most renowned...
- Posted 7 months ago
- 0
Let’s manage a project from A to… GIT
Let’s learn about the firmware management and versioning tool...
- Posted 7 months ago
- 0

Here are the Winners from the 3Drag 3d printing contest
Here we are, eventually the contest has come to an...
- Posted 5 years ago
- 0
Updates from the 3Drag 3dprinting contest: Roland Hoffert’s Hacks
Roland Hoffert, from www.eytec.de, submitted us this 3Drag (Velleman K8200...
- Posted 5 years ago
- 0
Updates from the 3Drag 3dprinting contest: Karl Seiss’s Hack
Karl Seiss from Austria made a very clever hack to...
- Posted 5 years ago
- 0
Updates from the 3Drag 3dprinting contest: Fa)(a from Giacomo Falaschi
Giacomo Falaschi sent us his Falla3D new printer project: you...
- Posted 5 years ago
- 0

An innovative solution in the blockchain market: 25MB Block Size – can it be real?
Sponsored post by ILCoin In the past 10...
- Posted 1 week ago
- 0
PCB CAD, A SELECTION GUIDE
Getting to know and evaluate the software offer for PCB,...
- Posted 4 months ago
- 0
RISC-V, THE ERA OF OPEN SOURCE CPU HAS BEGUN
Open architectures for processors too? It looks like it...
- Posted 5 months ago
- 1
Things You Didn’t Know Could Be Open Source
There are a number of different factors that led...
- Posted 1 year ago
- 0

Arduino ISP (In System Programming) and stand-alone circuits
We use an Arduino to program other ATmega without...
- Posted 7 years ago
- 224
Arduino GSM shield
This is a very low...
- Posted 8 years ago
- 218
Localizer with SIM908 module
The device is based on a GSM/GPRS module with...
- Posted 7 years ago
- 185
GSM GPS shield for Arduino
Shield for Arduino designed and based on the module...
- Posted 7 years ago
- 180
Small Breakout for SIM900 GSM Module
Some post ago we presented a PCB to mount...
- Posted 8 years ago
- 115

Four New Affordable and Powerful Arduino Nano Boards
Arduino announced a new family of affordable, low-power Nano...
- Posted 4 hours ago
- 0
PiChuck: Wii Nunchuk Built-in Raspberry Pi Joystick Controller
The Wii Nunchuk controller is the notorious official Nintendo...
- Posted 1 day ago
- 0
ROBOTIC Arm in plexiglass part 1
We create our first robotic arm with four...
- Posted 1 day ago
- 0
Switching-mode power supply 350W 12V
Laboratory power supply in high efficiency switching technology. Metal...
- Posted 2 days ago
- 0
Heated plate in aluminum for 3D printer
Made of aluminum with a thickness of 3 mm...
- Posted 2 days ago
- 0