Don't miss
- ESP 32 ICONS AND ANIMATIONSPosted 11 hours ago
- Autonomous Fire Fighting Robot With Self Finding FlamesPosted 2 weeks ago
- Automatic tank filling at homePosted 2 weeks ago
- Automatic chess board designPosted 3 weeks ago
- Automated Hydroponic SystemPosted 3 weeks ago
- Arduino HangmanPosted 3 weeks ago
- All Band Receiver With Si4735 (FM / RDS, AM and SSB) With ArduinoPosted 3 weeks ago
- A Super Easy Security Camera With the ESP32 CAMPosted 3 weeks ago
- An ESP8266-based WiFi doorbell sends SMS messagesPosted 3 weeks ago
- 18650 Battery charger reverse polarity protectionPosted 4 weeks ago
Monitor your home with this Nano 33 IoT-based system
By Emanuele Signoretta on May 1, 2020
Using an Arduino Nano 33 IoT, Jithin Sanal designed a home monitoring system capable of detecting noxious gases with an MQ2 sensor as well as sensing temperature, pressure, humidity, and ambient light via a BME280 sensor and an LDR. All of this is mounted onto a custom PCB that’s powered by a 9V battery, or one could also use a 9-12V adapter if more convenient.
Related Posts
2 Comments
Leave a Reply
-
Arduino ISP (In System Programming) and stand-alone circuitsWe use an Arduino to program other ATmega without...
- Posted 9 months ago
-
-
-
GSM GPS shield for ArduinoShield for Arduino designed and based on the module...
- Posted 9 months ago
-
Small Breakout for SIM900 GSM ModuleSome post ago we presented a PCB to mount...
- Posted 9 months ago
-
-
Autonomous Fire Fighting Robot With Self Finding FlamesThe concept of this robot is very simple. To...
- Posted 9 months ago
-
Automatic tank filling at homeAutomatic tank filling in-home helps you automate your motor...
- Posted 9 months ago
-
-
Automated Hydroponic SystemThe system monitors pH, TDS, temperature, humidity and water...
- Posted 9 months ago
Pingback: Monitor your home with this Nano 33 IoT-based system – HYPEREDGE EMBED
Pingback: Monitor your home with this Nano 33 IoT-based system – The Electronics Resource