chess playing | Open Electronics

Don't miss

DIY a Raspberry Pi Zero Powered Chess Challenger
This Raspberry Pi Zero powered retro themed Chess Challenger, is an open source hardware design capable of running an up to date open source chess engine, Stockfish. The original game was devised by Fidelity Electronics, and took...
- Posted 8 months ago
- 0

IONOPI_RTC MODULE I/O PI WITH RTC
Iono Pi RTC an extremely versatile Input/Output module, based on...
- Posted 12 hours ago
- 0
Pololu ball caster with 1.8 cm metal ball
The ball caster is used as a third support point...
- Posted 13 hours ago
- 0
Pololu ball caster with metal ball 1 cm
The ball caster is used as the third foothold in...
- Posted 14 hours ago
- 0
Matrix display bicolored LED 3mm 32×16
Matrix display made of 8 digits with 64 two-color 3...
- Posted 15 hours ago
- 0
Light wood filament 1.75 mm – 500 grams
High quality filament made of recycled wood and a polymer...
- Posted 15 hours ago
- 0
Dual display 7 segment 2,3
7-segment 2-digit display with common anode and red LED with...
- Posted 16 hours ago
- 0
Driver for dual display 7 segments
Based on the PIC16F690 microcontroller, this driver board allows you...
- Posted 18 hours ago
- 0
Driver for double display 7 segments
Based on the PIC16F690 microcontroller, this driver board allows you...
- Posted 19 hours ago
- 0

PCB CAD, A SELECTION GUIDE
Getting to know and evaluate the software offer for PCB,...
- Posted 8 months ago
- 0
The world of GIThub
Let’s learn all the aspects of the most renowned...
- Posted 11 months ago
- 0
Let’s manage a project from A to… GIT
Let’s learn about the firmware management and versioning tool...
- Posted 11 months ago
- 0

Here are the Winners from the 3Drag 3d printing contest
Here we are, eventually the contest has come to an...
- Posted 5 years ago
- 0
Updates from the 3Drag 3dprinting contest: Roland Hoffert’s Hacks
Roland Hoffert, from www.eytec.de, submitted us this 3Drag (Velleman K8200...
- Posted 5 years ago
- 0
Updates from the 3Drag 3dprinting contest: Karl Seiss’s Hack
Karl Seiss from Austria made a very clever hack to...
- Posted 5 years ago
- 0
Updates from the 3Drag 3dprinting contest: Fa)(a from Giacomo Falaschi
Giacomo Falaschi sent us his Falla3D new printer project: you...
- Posted 5 years ago
- 0

The Best Gadgets for Seniors That Will Help Improve Their Everyday Lives
The majority of adults would, for the most part, rather...
- Posted 1 month ago
- 0
What Neural Networks/Deep Learning Books Should I Read?
There are lots of deep learning books on the...
- Posted 1 month ago
- 0
Bitcoin & Blockchain
We are going to take advantage of one of...
- Posted 3 months ago
- 0
The end of the Makers movement? What happened at Maker Media?
Big financial problems for Maker Media that blocked...
- Posted 3 months ago
- 1

Arduino ISP (In System Programming) and stand-alone circuits
We use an Arduino to program other ATmega without...
- Posted 8 years ago
- 224
Arduino GSM shield
This is a very low...
- Posted 9 years ago
- 218
Localizer with SIM908 module
The device is based on a GSM/GPRS module with...
- Posted 7 years ago
- 185
GSM GPS shield for Arduino
Shield for Arduino designed and based on the module...
- Posted 7 years ago
- 180
Small Breakout for SIM900 GSM Module
Some post ago we presented a PCB to mount...
- Posted 8 years ago
- 115

IONOPI_RTC MODULE I/O PI WITH RTC
Iono Pi RTC an extremely versatile Input/Output module, based...
- Posted 12 hours ago
- 0
Pololu ball caster with 1.8 cm metal ball
The ball caster is used as a third support...
- Posted 13 hours ago
- 0
Pololu ball caster with metal ball 1 cm
The ball caster is used as the third foothold...
- Posted 14 hours ago
- 0
Matrix display bicolored LED 3mm 32×16
Matrix display made of 8 digits with 64 two-color...
- Posted 15 hours ago
- 0
Light wood filament 1.75 mm – 500 grams
High quality filament made of recycled wood and a...
- Posted 15 hours ago
- 0