- Wireless Power TransferPosted 22 hours ago
- Robot Punchers with ArduinoPosted 2 days ago
- A minimal 3D-printed scalePosted 4 days ago
- Expanding the pins of a microcontrollerPosted 7 days ago
- Let’s create a small level with a matrix displayPosted 1 week ago
- ChatGPT: Writing Code with Artificial IntelligencePosted 1 week ago
- Free Webinar: Arduino IoT Cloud and ESP32 DemoboardPosted 1 week ago
- Maker Faire Rome – The European edition and FAE Technology launch the contest “MY Maker PCBA: your electronics for a better planet”Posted 3 months ago
- Efficient and Compact Stereo Power Amplifier: Unleash High-Quality Audio with the PAM8610Posted 3 months ago
- Terminus FE1.1 USB hub board: the solution to connect four USB devicesPosted 6 months ago
-
DIY Your Star Wars Mouse Droid With Hidden Display
Differently from the small black droids that you have seen in the Star Wars saga, the mouse droid by Potent Printables acts as a sort of physical messaging app. It’s able to travel to the correct location, then pop...
- Posted 5 years ago
-
DIY a Voice Controlled L3-37 Star Wars Droid
One of the best parts of Solo: A Star Wars Story is the L3-37 droid, who’s been uniquely pieced together and upgraded from parts of other droids. The maker Patrick Stefanski has essentially done the same thing to turn Amazon’s Alexa...
- Posted 5 years ago
-
DIY an Alexa Enabled Death Star Lamp
Maker Adi Singh recently wrote an Instructable to build an expanding Death Star Lamp starting from a popoular Ikea lamp. This amazing creation is also controlled with your voice. This is possible thanks to an Arduino MKR1000...
- Posted 5 years ago
-
MyMiniFactory Celebrates The Last Jedi with 3D Printed Star Wars Models
To mark the release of “Star Wars Episode VIII: The Last Jedi”, MyMiniFactory has taken a break from its Christmas contests and collated the best Star Wars-themed 3D printable models in its community. A short selection of...
- Posted 6 years ago
-
Build your own LED powered light Saber
The Star Wars saga, created by George Lucas and started 40 years ago with the first Star Wars movie, has fascinated and somehow amused more than a generation; many successful movies have been proposed to the...
- Posted 6 years ago
-
Arduino Powered R4-P17 Start Wars Droid
Alejandro Clavijo, together with his father Jerónimo, spent two years building the first official fan-made model of the R4-P17 Star Wars droid. In the Star Wars saga, R4-P17 was the robot companion to the young Obi-Wan Kenobi....
- Posted 6 years ago
-
Ever wanted to be Darth Vader? Bring Star Wars to life with 3D Printed ‘Tractor Beam’
Star Wars fans will be really excited about the opportunity to turn a dream into reality. Through this “tractor beam” you are able to move small objects using sound waves, in the comfort of your own home...
- Posted 7 years ago
-
Imperial Shuttle Drone, Darth Vader is among us!
The Maker and MIT aerospace engineer Adam Woodworth did this incredible drone, replicating the imperial drone with engine special effects too. Amazing! Over the past decade or so, I’ve been building a new RC airplane every month or so....
- Posted 7 years ago
-
XRobots returns with most advanced 3D printed BB-8 Droid yet
James Bruton of XRobots managed to create not one, not two, but three fully-functional and entirely impressive 3D printed BB-8 droids, with each one getting better than the last. Bruton’s first 3D printed BB-8 was based on...
- Posted 7 years ago
-
DIY Star Wars Life-Size Phone Controlled BB8 Droid
For all the Star Wars lovers, especially those that liked the Episode VII, a must DIY project from DFRobot blog: the home made BB8 Droid! Today, I’m going to teach you how to build a working, life-sized,...
- Posted 8 years ago
-
Be a Jedi or Sith with less than $225! On Kickstarter now!
May the Force be with you! Great project dedicated to all of us born in the “Star Wars saga” years. If you dreamed to be a Jedi or a Sith, now you can purchase on Kickstarter the...
- Posted 8 years ago