- FISHINO REV. 2 boardPosted 4 hours ago
- FruitNanny: The electronic guardianPosted 23 hours ago
- Antennino: The arduino with an antenna – Low Power and OTA programmingPosted 2 weeks ago
- STM32 Development board of PLCPosted 2 weeks ago
- RC SWITCHPosted 3 weeks ago
- PCB CAD, A SELECTION GUIDEPosted 1 month ago
- Antennino: the low-power Arduino with Antenna – The BootloaderPosted 1 month ago
- Mercury System available nowPosted 1 month ago
- Automatic dispenser for catsPosted 2 months ago
- RISC-V, THE ERA OF OPEN SOURCE CPU HAS BEGUNPosted 2 months ago
Interviews
-
A Magazine Made of Makers for Makers
Thanks our friends from Bare Conductive for this interview to Boris Landoni. We meet them @MakerFaire...
-
Amazing interview with Naomi ‘SexyCyborg’ Wu
Among the most famous and influential women in the world of Makers, there is certainly...
-
Interview to Dale Dougherty: Founder & CEO MAKE Magazine and Maker Faire
How you can read from his Twitter profile, Dale Dougherty is the Founder of MAKE Magazine...
More Interviews
-
Interview to Nebojša Matić CEO of MikroElektronika
Open-Electronics.org: When and why you decided to start Mikroe? Nebojša Matić: It didn’t start...
- Posted 2 years ago
- 0
-
Interview to Richard Curtin (Premier Farnell): micro:bit, Codebug, IBM IoT Learner Kit
We had the pleasure to interview Richard Curtin (Global Director of Strategic...
- Posted 2 years ago
- 0
-
Interview to Eben Upton: the New Raspberry Pi 3, Makers, Pi Zero…and more
Raspberry Pi 3 was presented recently and we took the opportunity to talk to...
- Posted 3 years ago
- 0
-
From Arduino to Genuino, the reasons for a choice
Two websites, the company’s going public, lawsuits in many parts of the world:...
- Posted 3 years ago
- 2
-
Maker Faire Bay Area 2015, Interview with Massimo Banzi: Genuino and the future of Arduino
During the last Maker Faire Bay Area held in San Francisco on May, 15th-17th,...
- Posted 4 years ago
- 0
-
Open Source Robots to use Open Wheels project to help hospitalised children
Everybody loves a visit to the zoo. And for a kid it can be...
- Posted 4 years ago
- 4
-
Merry Christmas and a Open New Year
Here we are, a great year full of innovations and open source project is...
- Posted 4 years ago
- 2
-
Woelab: bringing Africa on the train to the next Industrial Revolution
Introduction I just wanted so badly to do this interview: when meeting the guys...
- Posted 4 years ago
- 0
-
Obrary, on a challenge: marketing Open Design (or Open Source Hardware)
Few days ago I had the chance of exchanging few tweets with the Obrary...
- Posted 4 years ago
- 0
-
MatterMachine is the Third Industrial Revolution, customized for you
Tom Kluyskens, founder of MatterMachine, is a civil electromechanical engineer that can’t be better...
- Posted 4 years ago
- 0
-
Exclusive interview: Pete Lomas, co-founder of Raspberry Pi on Mission, Openness, Communities
Pete Lomas is a co-founder and trustee of the Raspberry Pi Foundation, a UK...
- Posted 5 years ago
- 3
-
Interview to Open Trons
Biology labs today are where computers were in the 1950s and ‘60s —...
- Posted 5 years ago
- 4
-
Interview to Fa)(a 3d, the first Open Source 3d Printer using a magnetic levitation system
We recently spotted a very interesting project, the 3dprinter called Fa)(a 3d: a modular,...
- Posted 5 years ago
- 1
-
Register you 3Drag on 3Hubs (plus a bonus interview)
Do you follow the work at 3DHubs? You should. This amazing dutch born startup...
- Posted 5 years ago
- 0
-
Global transitions, Fab Labs and Fab Cities: interview with Tomas Diez
Incredibly enough, given the incredible amount of work he’s doing to prepare the next...
- Posted 5 years ago
- 4
Latest Interviews
-
A Magazine Made of Makers for Makers
Thanks our friends from Bare Conductive for this interview to...
- Posted 1 year ago
- 0
-
Amazing interview with Naomi ‘SexyCyborg’ Wu
Among the most famous and influential women in the...
- Posted 1 year ago
- 0
-
Interview to Dale Dougherty: Founder & CEO MAKE Magazine and Maker Faire
How you can read from his Twitter profile, Dale...
- Posted 1 year ago
- 0
-
Interview to Nebojša Matić CEO of MikroElektronika
Open-Electronics.org: When and why you decided to start Mikroe?...
- Posted 2 years ago
- 0
-
Interview to Richard Curtin (Premier Farnell): micro:bit, Codebug, IBM IoT Learner Kit
We had the pleasure to interview Richard Curtin...
- Posted 2 years ago
- 0
-
Interview to Eben Upton: the New Raspberry Pi 3, Makers, Pi Zero…and more
Raspberry Pi 3 was presented recently and we took the...
- Posted 3 years ago
- 0
-
From Arduino to Genuino, the reasons for a choice
Two websites, the company’s going public, lawsuits in many...
- Posted 3 years ago
- 2
-
Maker Faire Bay Area 2015, Interview with Massimo Banzi: Genuino and the future of Arduino
During the last Maker Faire Bay Area held in San...
- Posted 4 years ago
- 0
-
Open Source Robots to use Open Wheels project to help hospitalised children
Everybody loves a visit to the zoo. And for a...
- Posted 4 years ago
- 4
-
Merry Christmas and a Open New Year
Here we are, a great year full of innovations and...
- Posted 4 years ago
- 2
Latest Interviews
-
A Magazine Made of Makers for Makers
Thanks our friends from Bare Conductive for this interview to...
- Posted 1 year ago
- 0
-
Amazing interview with Naomi ‘SexyCyborg’ Wu
Among the most famous and influential women in the...
- Posted 1 year ago
- 0
-
Interview to Dale Dougherty: Founder & CEO MAKE Magazine and Maker Faire
How you can read from his Twitter profile, Dale...
- Posted 1 year ago
- 0
-
Interview to Nebojša Matić CEO of MikroElektronika
Open-Electronics.org: When and why you decided to start Mikroe?...
- Posted 2 years ago
- 0
-
Interview to Richard Curtin (Premier Farnell): micro:bit, Codebug, IBM IoT Learner Kit
We had the pleasure to interview Richard Curtin...
- Posted 2 years ago
- 0
Login
-
Arduino ISP (In System Programming) and stand-alone circuits
We use an Arduino to program other ATmega without...
- Posted 7 years ago
- 224
-
Localizer with SIM908 module
The device is based on a GSM/GPRS module with...
- Posted 7 years ago
- 185
-
GSM GPS shield for Arduino
Shield for Arduino designed and based on the module...
- Posted 6 years ago
- 180
-
Small Breakout for SIM900 GSM Module
Some post ago we presented a PCB to mount...
- Posted 8 years ago
- 115
-
Spoofing Google Search Results
TL;DR – By adding two parameters to any Google...
- Posted 2 hours ago
- 0
-
DIY an Arduino-based 5 in 1 Multimeter Device
YouTuber Electronoobs has just created an Arduino Nano multimeter...
- Posted 4 hours ago
- 0
-
Jerry (YC S17) Is Hiring Senior Software Developers (Toronto, Canada)
Think insurance shopping is painful and time-consuming? We thought...
- Posted 5 hours ago
- 0
-
Microsoft begins work on its 2020 Windows releases in new preview
Microsoft has published a new preview release of Windows...
- Posted 8 hours ago
- 0