• GSM Remote Control
    Software

    PC configuration software for all remote controls described in the last four issues. This application is used to set all parameters via PC, instead of using the boring and expensive SMS configuration system. Download “Configuratore TDG v.2.3.0.0”...

    • Posted 8 years ago
    • 0
  • GSM Remote Control – Temperature Control
    Part 1 – Introduction

    Allows to remotely manage the heating or cooling of any room. It can also notify, via SMS or phone call, when the sensed temperature falls out the set limit value or the alarm input is active. In...

    • Posted 8 years ago
    • 0
  • GSM Remote Control – Temperature Control
    Part 2 – Schematic

    The full GSM thermostat is managed by a Microchip PIC18F46K20-I/PT microcontroller, programmed with a firmware that controls the temperature and takes care of the communication with the GSM module which is the component named GSM; this is,...

    • Posted 8 years ago
    • 0
  • GSM Remote Control – Temperature Control
    Part 3 – Assembly

    For the GSM temperature controller we have provided a double-sided PCB with plated holes, made by photoengraving; once you have the board you can start the assembly with SMD components. The thermal probe can also be mounted...

    • Posted 8 years ago
    • 0
  • GSM Remote Control – Temperature Control
    Part 4 – SMS Command

    Commands can be given in two different ways: the first one is to send the SMS according to required syntax and with the password (if required), needful to avoid strangers to operate the configuration; the second one...

    • Posted 8 years ago
    • 0