Inspired by Yoshii Kazuya’s laser-spiked outfit, github user abetusk decided to create an excellent version of the getup by embedding 128 laser diodes in his own jacket. These lasers are powered by an Arduino Nano, along with...

Developer and enthusiast Adrian Rosebrock published his Raspberry Pi project a few weeks ago, providing full instructions and all the code required to build your very own Raspberry Pi security camera using OpenCV and computer vision. Adrian’s...

The maker James Bruton created a 3d-printed gripper with a three-finger design and three servo motors controlled by and Arduino Uno sbc. The design is ideal for gripping a variety roundish parts, and is held open by...

“If you are a Pi-addict like me, I’m sure you were extremely happy like I was, when was announced few months ago, the official Raspberry Pi TV HAT. At the same time, my ISP announced a new...

Created by Mr Innovative, this Arduino based mini radar is capable of detecting objects placed in its line of sight. The 3D-printed console features a small SG90 servo to pan the sensor over a space, picking up...

Aptly named TWIST the open source environmental monitoring system is capable of sending tweets and collecting meteorological data thanks to its include gas, rain, light, temperature and humidity sensors. “Meet Tweeting Weather IoT Station aka TWIST –...

If you wear a self-winding watch, I’m sure you’re aware that watch winders are generally very expensive, or cheap and noisy. So Kristopher Marciniak decided to hack an inexpensive winder replacing the stock motor with a stepper,...

Professor Anil K. Jain leads a biometrics research group and guiding students Joshua J. Engelsma and Kai Cao has assisted in the creation of a secure fingerprint reader with improved spoof-print detection. RaspiReader is a low-cost open...

Created by Tucker Shannon, the single pixel scanning camera uses a pair of stepper motors which directs the RGB color sensor (Adafruit TCS3472) in a square spiral for image acquisition: all powered by an Arduino Uno SBC. If you...

Instructables user Sieuwe Elferink has just created a semi-autonomous kids’ four-wheeler. The Arduino powered Quad can steer itself within a set of lines, and stop for pedestrians and inanimate objects. For this project you will need the following materials: 3x...

Electronic technician and Raspberry Pi enthusiast Pierre Muth has unveiled a new Raspberry Pi Polaroid camera he has created in the form of the PolaPi-Zero, which uses a thermal printer to provide instant hardcopies of your photographs. The...

If you have to duplicate many SD cards for example to boot Raspbian on multiple Raspberry Pi board but you want to save money, probably you’d better build a SD card duplicator by yourself. This is exactly...

When piloting a vehicle remotely, it’s only natural to tilt your controller one way or the other to help guide it in the right direction. While usually this has no effect whatsoever, YouTuber Electronoobs decided to take...

The Etch-A-Sketch was released by The Ohio Art Company in 1960. The popularity of the device is sort of interesting because it has lots of annoying problems: knobs only move the cursor up/down/left/right. Diagonals and curves require...

If you need a DC Motor for your next project, you can obviously buy it or you can build it! In order to assist with the winding process for a self-built motor, on thingiverse you can find...

If you have the weekend off and if you own a Raspberry Pi 3 or Zero W sbc, this project is prefect for you! The Raspberry Pi wireless access point is built on top of Linux, using...

Dear maker Anthony DiPilato, that is forward thinking! “It’s just used for pulling the plane out of the hangar and putting back in. It’s stored in the hangar. There are some tugs small enough to put in...

VCV Rack is a standalone application created by Andrew Belt, a young developer who developed a strong interest in the world of Eurorack modular synthesis. One of the foundational goals of the project was to keep it free...