https://2019.makerfairerome.eu/en/
  • IKEA SMS lamp with GSM shield

          We create a lamp controlled by SMS using a GSM shield, a RGB shield and a Arduino UNO. Due to the simplicity of these boards, simply plug one over the other and connect a...

    • Posted 7 years ago
    • 4
  • GSM GPS shield for Arduino

    Shield for Arduino designed and based on the module GSM/GPRS SIM900 or the GSM/GPRS & GPS module SIM908, to make calls, voice and data connections via GPRS.     HARDWARE INNOVATIONS This new version (old Arduino GSM...

    • Posted 7 years ago
    • 180
  • GSM/GPRS & GPS modem with SIM900/SIM908 module

    Allows you to create data connections on the GSM network through a standard USB interface. The cellular modems, particularly USB-stick ones, are now at very affordable prices, however they’re limited: they are explicitly designed for Internet connections,...

    • Posted 7 years ago
    • 99
  • Software and firmware for TiDiGino (GSM remote controller with Arduino)

    A lot of people who bought the TiDiGino ask me how to test it. The Gsm Remote Control is provided with bootloader, so you have to insert the prefered sketch that you can find in code.google. Daniele...

    • Posted 8 years ago
    • 0
  • TiDiGino, the Arduino-based GSM remote control

      Using an ATmega 2560 and therefore the heart of Arduino, we have developed a universal remote control with GSM. This allows  to control 2IN/2OUT, DTMF key, gate control and GSM thermostat activated remotely. We have already...

    • Posted 8 years ago
    • 14
  • How to find the location with GSM cells

    Discover how to find the coordinate from the GSM cells!!   The PHP code to find the coordinates from GSM cells  

    • Posted 8 years ago
    • 13
  • TiDiGino Contest

       The Contest is close, visit the TiDiGino page The project TiDiGino We developed a new GSM remote control called TiDiGino. The name recalls the initials (TDGxx) of our previous GSM remote control and is also based on the Arduino project. All the details of this circuit can...

    • Posted 8 years ago
    • 8
  • Small Breakout for SIM900 GSM Module

    Some post ago we presented a PCB to mount the SIM900 module. The project is used in our GSM remote control and the Arduino GSM Shield. The dimensions aren’t big (1.75×1.95 inches) but in some cases they...

    • Posted 8 years ago
    • 115
  • Arduino GSM shield

            This is a very low cost and simple Arduino GSM and GPRS shield. We use the module SIMCom SIM900. It’s the cheaper module now avalaible in the market. The module is not simple...

    • Posted 9 years ago
    • 218
  • GSM Module – M10

    This module produced by Quectel, too, is GSM/GPRS (GSM Phase 2/2+) compatible and is a Quad-band type; the radio section works at a frequency of GSM 850 MHz, GSM 900 MHz, DCS 1800 MHz,  and PCS 1900...

    • Posted 9 years ago
    • 0
  • GSM Module – SIM900

    This is a GSM/GPRS-compatible Quad-band cell phone, which works on a frequency of 850/900/1800/1900MHz and which can be used not only to access the Internet, but also for oral communication (provided that it is connected to a...

    • Posted 9 years ago
    • 5