- Terminus FE1.1 USB hub board: the solution to connect four USB devicesPosted 6 days ago
- Understanding the Mechanics of 3D PrintingPosted 2 months ago
- SDS011 the Air Quality SensorPosted 3 months ago
- NIXIE STYLE LED DISPLAYPosted 6 months ago
- TOTEM: learning by experimentingPosted 6 months ago
- Google Assistant Voice Controlled Switch – NodeMCU IOT ProjePosted 7 months ago
- Water Softener Salt Level MonitorPosted 7 months ago
- Sparkly Air SensorPosted 7 months ago
- Ultra sonic distance finder with live statusPosted 7 months ago
- Windows interface to have total control over lampsPosted 7 months ago
Meet the Founders
-
Open-Electronics will be at MakerFaire Bay Area 2015!
Open-Electronics will have a booth at MakerFaire Bay Area, stay tuned for further details! Maker...
-
Obrary, on a challenge: marketing Open Design (or Open Source Hardware)
Few days ago I had the chance of exchanging few tweets with the Obrary team about...
-
MatterMachine is the Third Industrial Revolution, customized for you
Tom Kluyskens, founder of MatterMachine, is a civil electromechanical engineer that can’t be better described than...
More Meet the Founders
-
Exclusive interview: Pete Lomas, co-founder of Raspberry Pi on Mission, Openness, Communities
Pete Lomas is a co-founder and trustee of the Raspberry Pi Foundation, a UK...
- Posted 9 years ago
- 3
-
Interview to Open Trons
Biology labs today are where computers were in the 1950s and ‘60s —...
- Posted 9 years ago
- 4
-
Interview with MEG: the Connected, Open Source, DIY Greenhouse
When I went to visit Maker Faire Rome earlier in 2013, in October, I...
- Posted 9 years ago
- 5
-
FarmBot Founder Rory Aronson explains Precision Agriculture
If you have not yet discovered project Farmbot, this interview will be a revelation...
- Posted 9 years ago
- 5
-
Interview to Alastair Parvin and Wikihouse project
For the latest episode of our Meet The Founders interviews we are releasing...
- Posted 9 years ago
- 4
-
Interview to the FABTotum Team: the Personal Fabricator that wants to Change the Rules
The excitement around the new personal fabrication tool that is raising funds on Indiegogo...
- Posted 10 years ago
- 10
-
Interview to Xavier Auffret, founder of Jerry Do It Together
Xavier Auffret is a former telecommunication engineer who decided to reorient his work toward...
- Posted 10 years ago
- 5
-
Meet the founders – Interview to SeeedStudio Founder Eric Pan
Here’s a new episode of our Meet the Founders column! This time we interviewed...
- Posted 10 years ago
- 1
-
Meet the founders – MakingSociety – Mathilde Berchon
The Meet the Founders column goes forward with this interview with Mathilde Berchon a...
- Posted 10 years ago
- 0
-
Meet the founders! An interview with Circuits.io
With this post we are kicking off an official “Meet the Founders” column to...
- Posted 10 years ago
- 1
-
An interview with LadyAda, Limor Fried founder of Adafruit
Limor Fried aka Ladyada is the founder of the Adafruit Industries. Besides having been...
- Posted 10 years ago
- 3
-
Interview with Nathan Seidle, founder of Sparkfun
Nathan Seidle first started Sparkfun when he was still attending college, studying engineering, and...
- Posted 10 years ago
- 2
Latest Meet the Founders
-
Open-Electronics will be at MakerFaire Bay Area 2015!
Open-Electronics will have a booth at MakerFaire Bay Area,...
- Posted 8 years ago
- 0
-
Obrary, on a challenge: marketing Open Design (or Open Source Hardware)
Few days ago I had the chance of exchanging few...
- Posted 9 years ago
- 0
-
MatterMachine is the Third Industrial Revolution, customized for you
Tom Kluyskens, founder of MatterMachine, is a civil electromechanical engineer...
- Posted 9 years ago
- 0
-
Exclusive interview: Pete Lomas, co-founder of Raspberry Pi on Mission, Openness, Communities
Pete Lomas is a co-founder and trustee of the Raspberry...
- Posted 9 years ago
- 3
-
Interview to Open Trons
Biology labs today are where computers were in the...
- Posted 9 years ago
- 4
-
Interview with MEG: the Connected, Open Source, DIY Greenhouse
When I went to visit Maker Faire Rome earlier in...
- Posted 9 years ago
- 5
-
FarmBot Founder Rory Aronson explains Precision Agriculture
If you have not yet discovered project Farmbot, this interview...
- Posted 9 years ago
- 5
-
Interview to Alastair Parvin and Wikihouse project
For the latest episode of our Meet The Founders...
- Posted 9 years ago
- 4
-
Interview to the FABTotum Team: the Personal Fabricator that wants to Change the Rules
The excitement around the new personal fabrication tool that is...
- Posted 10 years ago
- 10
-
Interview to Xavier Auffret, founder of Jerry Do It Together
Xavier Auffret is a former telecommunication engineer who decided to...
- Posted 10 years ago
- 5
Latest Meet the Founders
-
Open-Electronics will be at MakerFaire Bay Area 2015!
Open-Electronics will have a booth at MakerFaire Bay Area,...
- Posted 8 years ago
- 0
-
Obrary, on a challenge: marketing Open Design (or Open Source Hardware)
Few days ago I had the chance of exchanging few...
- Posted 9 years ago
- 0
-
MatterMachine is the Third Industrial Revolution, customized for you
Tom Kluyskens, founder of MatterMachine, is a civil electromechanical engineer...
- Posted 9 years ago
- 0
-
Exclusive interview: Pete Lomas, co-founder of Raspberry Pi on Mission, Openness, Communities
Pete Lomas is a co-founder and trustee of the Raspberry...
- Posted 9 years ago
- 3
-
Interview to Open Trons
Biology labs today are where computers were in the...
- Posted 9 years ago
- 4
Newsletter
-
Arduino ISP (In System Programming) and stand-alone circuits
We use an Arduino to program other ATmega without...
- Posted 11 years ago
- 225
-
Localizer with SIM908 module
The device is based on a GSM/GPRS module with...
- Posted 11 years ago
- 187
-
GSM GPS shield for Arduino
Shield for Arduino designed and based on the module...
- Posted 11 years ago
- 181
-
Small Breakout for SIM900 GSM Module
Some post ago we presented a PCB to mount...
- Posted 12 years ago
- 115
-
Cookiecad, the easiest way to create custom cookie cutters to print in 3D
Cookiecad is a tool that allows you to create...
- Posted 5 days ago
- 0
-
Terminus FE1.1 USB hub board: the solution to connect four USB devices
Based on a single chip from Terminus, it...
- Posted 6 days ago
- 1
-
LED Filament Lamp with Integrated Dimmer Module Design
LEDs come in many different shapes and sizes....
- Posted 1 month ago
- 0
-
Main Technologies in 3D Printing
3D printing is a cutting-edge technology that enables the...
- Posted 1 month ago
- 0
-
Understanding the Mechanics of 3D Printing
3D printing is a cutting-edge technology that enables the...
- Posted 2 months ago
- 0