• Air Quality Sensor – PM2.5, PM10

    This module uses the principle of optical LASER light scattering to measure the concentration of particulate matter (PM2.5 and PM10) in the air. It consists of a LASER diode, a photodiode, a microcontroller, a low-noise amplifier and...

    • Posted 2 years ago
    • 1
  • Small solar cell (0,5 V / 800 mA)

    Photovoltaic cell with very small dimensions, suitable for carrying out experiments with solar energy. Output voltage: 0.5 V, maximum current: 800 mA, dimensions: 72 x 46 x 2 mm.                    ...

    • Posted 2 years ago
    • 1
  • Chip 1 IN – 4 OUT USB 2.0 High Speed

    The FE1.1s chip is a high-performance, low-power integrated circuit that enables a USB 2.0 HUB with four output ports and corresponding status LEDs. It requires a minimum number of external components, which are essentially a quartz for...

    • Posted 2 years ago
    • 0
  • Display Oled 1.3 inch

    1.3″ Organic Light Emitting Diode (OLED) Display with good contrast, no backlighting required. Based on the graphics controller SH1106, SPI and I²C interface, resolution 128×64 px, active display area size 28×13 mm, board size 41×38 mm.   Technical specifications...

    • Posted 2 years ago
    • 0
  • PRO midi 1284P Developer’s Board

    Developer’s board specially made for use with the PRO midi 1284 prototyping board. It has housing for PRO midi 1284P and various connectors to connect to or accommodate various electronic devices (including in the form of breakout...

    • Posted 2 years ago
    • 0
  • LEGO Compatible Arduino Modules Set

    Design, build and have fun with this handy case containing lots of modules set up to fit on LEGO bricks and usable for robotics, Arduino, Raspberry Pi, etc. Included in the package is a compatible Arduino Uno...

    • Posted 3 years ago
    • 0
  • BME280 – Pressure, humidity, temperature sensor

    Ultra-small module (13.3×10.6×3.5 mm) based on the BME280 pressure, humidity and temperature sensor. It is fully calibrated, ready to use and supports I²C and SPI digital interfaces. The I²C interface supports Standard, Fast and High-Speed modes. Power...

    • Posted 3 years ago
    • 0
  • Multimedia Box Multimedia with Raspberry PI4 – 4GB

    JT-PIMEDIA is a set that includes of a black acrylic multimedia box and a 4GB Raspberry Pi 4 Model B. The box is made of a semi-transparent central part, an upper and a lower cover that magnetically...

    • Posted 3 years ago
    • 0
  • Plexiglass parts and 3D printed container

    Set containing all the LASER-cut plexiglass parts and the 3D printed container used in the project “THE FLAME THAT DOESN’T BURN” published in the Elettronica magazine n.239 October 2019. The plexiglass parts are 3 sheets of 3...

    • Posted 3 years ago
    • 0
  • Strip 144 LED NEOPIXEL length 1 meter – IP67

    Addressable light strip with144 high brightness, flexible and weatherproof RGB LEDs (IP67). Each single LED (SMD5050) integrates the control chip (SK6812). Each chip communicates with the next through a line by transferring the information received. These “intelligent”...

    • Posted 3 years ago
    • 0
  • Arduino Mega Protoshield

    This experimental board, made specifically for Arduino Mega, makes the connections of the PA0 ÷ 7 port of the Arduino Mega 2560 available and distributes them via on-board jumper for the management of the digital output lines....

    • Posted 3 years ago
    • 0
  • Electronic board for ESP8266 – Kit

    Small board able of hosting the ESP8266 Wi-Fi module (not included). It has a 2-way terminal for power input; 4-way terminal with + 5V, ground and the lines IO0 and IO2 (two GPIOs of the U2 module)...

    • Posted 3 years ago
    • 0
  • Electronic board with 20 Neopixel LED

    Electronic board with 20 miniature Neopixel LEDs (2.4×2.7×1.1 mm) and connectors with power supply pins and communication bus. Suitable for use with Nixiel displays (not included, see related products). Power supply: 5 VDC, dimensions (mm): 57x30x3.5, weight:...

    • Posted 3 years ago
    • 0
  • Nixiel display complete with Plexiglass + Electronics

    This kit allows you to create a single display with 7 segments that recall of the fascinating Nixie tubes. It is composed of 10 LASER engraved plexiglass panels with the numbers from 0 to 9, three plexiglass...

    • Posted 3 years ago
    • 0
  • Lead-acid battery ULTRACELL – 6V 1,3Ah

    Sealed rechargeable battery with a rated voltage of 6 V, 1.3 Ah of capacity and low level of self-discharge. Dimensions: 97 x 24 x 52 mm; Weight: 300 g. Suitable for alarm systems, UPS, toys, etc.  ...

    • Posted 3 years ago
    • 0
  • Lead-acid battery ULTRACELL – 6V 3,4Ah

    Sealed rechargeable battery with a rated voltage of 6 V, 3.4 Ah of capacity and low level of self-discharge. Dimensions: 134 x 34 x 62 mm; Weight: 630 g. Suitable for alarm systems, UPS, toys, etc.  ...

    • Posted 3 years ago
    • 0
  • Distance Alert – Keep safety distance

    Keep social distancing with an audible and optical signal that warns us when we are getting too close to the counter of a shop, a kiosk or a desk. The kit consists of a screen-printed plexiglass panel,...

    • Posted 3 years ago
    • 0
  • Raspberry Pi Camera 5 Mpx

    Small module for Raspberry Pi equipped with 5 megapixel camera (Omnivision 5647). It is capable of taking pictures with a resolution of 2592×1944 pixels. The small module, which has dimensions of only 25x24x9 mm and weighs 3...

    • Posted 3 years ago
    • 0