- Terminus FE1.1 USB hub board: the solution to connect four USB devicesPosted 2 months ago
- Understanding the Mechanics of 3D PrintingPosted 4 months ago
- SDS011 the Air Quality SensorPosted 5 months ago
- NIXIE STYLE LED DISPLAYPosted 8 months ago
- TOTEM: learning by experimentingPosted 9 months ago
- Google Assistant Voice Controlled Switch – NodeMCU IOT ProjePosted 9 months ago
- Water Softener Salt Level MonitorPosted 9 months ago
- Sparkly Air SensorPosted 9 months ago
- Ultra sonic distance finder with live statusPosted 9 months ago
- Windows interface to have total control over lampsPosted 9 months ago
-
A DIY Hovercraft based on Arduino Nano
It is probably the most incredible project you will see today. This is a totally in house built Hovercraft with the air cushion built with garbage bags. At the base of everything there is an Arduino Nano...
- Posted 10 months ago
-
Long range autonomous boat
This project was inspired by the vision of a real boat equipped with various sensors capable of measuring the depth of the seabed; we therefore thought of building an autonomous small-scale boat to perform the same tasks....
- Posted 10 months ago
-
Arduino Sensorless Electronic Speed Controller
If you’re dealing with brushless motors, you can be interested in this brushless speed controller by Electronoobs. Version 1.0 of his open-source ESC design has been just released. This is a sensorless brushless motor speed controller since...
- Posted 4 years ago
-
Let’s Build an open source Quadcopter – Part2
Let’s complete the construction of our aircraft and test it. Now that you have physically created the quadcopter – according to the indications supplied in the first installment of this article (published here) – you...
- Posted 7 years ago
-
Let’s Build an open source Quadcopter – Part1
A high performance multirotor copter that may be created by starting from a premade base and an Arduino Mega based board, that may receive the commands from a model aircraft’s remote control, and that supports telemetry...
- Posted 7 years ago