- Terminus FE1.1 USB hub board: the solution to connect four USB devicesPosted 7 days ago
- Understanding the Mechanics of 3D PrintingPosted 2 months ago
- SDS011 the Air Quality SensorPosted 3 months ago
- NIXIE STYLE LED DISPLAYPosted 6 months ago
- TOTEM: learning by experimentingPosted 6 months ago
- Google Assistant Voice Controlled Switch – NodeMCU IOT ProjePosted 7 months ago
- Water Softener Salt Level MonitorPosted 7 months ago
- Sparkly Air SensorPosted 7 months ago
- Ultra sonic distance finder with live statusPosted 7 months ago
- Windows interface to have total control over lampsPosted 7 months ago
-
Red Hat Films Produces Award-Winning Documentary About e-NABLE & the Open-Source CultureWe wrote about the really touching e-Nable project many times here on open-electronics.org even when it was not world famous. We are happy that RedHat is investing on their promotion, that project really deserves it! Open Source...
- Posted 7 years ago
-
Meet HU-GO, the Open Source DIY Low-Cost Wheelchair with 3D Printed PartsOne of the noblest uses of knowledge and especially the open source one is the willingness to apply it for a distributed social benefit, like in this case: Most able-bodied people don’t really understand exactly how expensive...
- Posted 7 years ago
-
3D Printed Prehensile Prosthetic Hand Combines Elegance with Incredible Functionality – 3DPrint.com3D Printing is strongly pushing the research and development of human and animal prosthetic forward. Organizations like e-Nable are gathering funds to help reaching more people both on scientists side and on patients as well, while also...
- Posted 8 years ago
-
e-nable Awarded $600k from Google for 3D printed ProstheticsWhen Innovation meets charity to help children, something magic happens! In the universe of 3D printing, one star shines particularly bright. The organization named e-NABLE has set out to harness the multitudes of home 3d printers to...
- Posted 8 years ago
-
Arduino ISP (In System Programming) and stand-alone circuitsWe use an Arduino to program other ATmega without...
- Posted 11 years ago
-
-
-
GSM GPS shield for ArduinoShield for Arduino designed and based on the module...
- Posted 11 years ago
-
Small Breakout for SIM900 GSM ModuleSome post ago we presented a PCB to mount...
- Posted 12 years ago
-
Cookiecad, the easiest way to create custom cookie cutters to print in 3DCookiecad is a tool that allows you to create...
- Posted 5 days ago
-
Terminus FE1.1 USB hub board: the solution to connect four USB devicesBased on a single chip from Terminus, it...
- Posted 7 days ago
-
LED Filament Lamp with Integrated Dimmer Module DesignLEDs come in many different shapes and sizes....
- Posted 1 month ago
-
Main Technologies in 3D Printing3D printing is a cutting-edge technology that enables the...
- Posted 1 month ago
-
Understanding the Mechanics of 3D Printing
3D printing is a cutting-edge technology that enables the...
- Posted 2 months ago
