GPS L80-R module with antenna

By Boris Landoni on February 24, 2020

66-channel GPS receiver module with patch antenna, UART interface: 4800-115.200bps settable (default 9600), NMEA 0183 format (GGA, RMC, GSA, GSV, VTG, GLL and GPTXT), PMTK (input, MTK proprietary protocol) . Suitable for a wide range of M2M applications such as portable devices, automotive, personal location, security, etc. Power supply: from 3 VDC to 4.3 VDC (3.3 Volt recommended).

Go to Open-Electronics Store

OpenStore

About Boris Landoni

Boris Landoni is the technical manager of Open-Electronics.org. Skilled in the GSM field, embraces the Open Source philosophy and its projects are available to the community.

OpenSource Products

Plexiglass parts and 3D printed container
Set containing all the LASER-cut plexiglass parts and the 3D...
- Posted 3 weeks ago
- 0
Strip 144 LED NEOPIXEL length 1 meter – IP67
Addressable light strip with144 high brightness, flexible and weatherproof RGB...
- Posted 3 weeks ago
- 0
Arduino Mega Protoshield
This experimental board, made specifically for Arduino Mega, makes the...
- Posted 3 weeks ago
- 0
Electronic board for ESP8266 – Kit
Small board able of hosting the ESP8266 Wi-Fi module (not...
- Posted 3 weeks ago
- 0
Electronic board with 20 Neopixel LED
Electronic board with 20 miniature Neopixel LEDs (2.4×2.7×1.1 mm) and...
- Posted 3 weeks ago
- 0
Nixiel display complete with Plexiglass + Electronics
This kit allows you to create a single display with...
- Posted 3 weeks ago
- 0
Lead-acid battery ULTRACELL – 6V 1,3Ah
Sealed rechargeable battery with a rated voltage of 6 V,...
- Posted 2 months ago
- 0
Lead-acid battery ULTRACELL – 6V 3,4Ah
Sealed rechargeable battery with a rated voltage of 6 V,...
- Posted 2 months ago
- 0

Tutorials

PCB CAD, A SELECTION GUIDE
Getting to know and evaluate the software offer for PCB,...
- Posted 5 months ago
- 0
DIY Sensor – Innovation & Implementation
A sensor converts data such as heat, light, sound,...
- Posted 1 year ago
- 0
Getting Started with the ESP32
This article is a getting started guide for the ESP32...
- Posted 2 years ago
- 0

Mods and Hacks

Here are the Winners from the 3Drag 3d printing contest
Here we are, eventually the contest has come to an...
- Posted 7 years ago
- 0
Updates from the 3Drag 3dprinting contest: Roland Hoffert’s Hacks
Roland Hoffert, from www.eytec.de, submitted us this 3Drag (Velleman K8200...
- Posted 7 years ago
- 0
Updates from the 3Drag 3dprinting contest: Karl Seiss’s Hack
Karl Seiss from Austria made a very clever hack to...
- Posted 7 years ago
- 0
Updates from the 3Drag 3dprinting contest: Fa)(a from Giacomo Falaschi
Giacomo Falaschi sent us his Falla3D new printer project: you...
- Posted 7 years ago
- 0

Opinions

PCB CAD, A SELECTION GUIDE
Getting to know and evaluate the software offer for PCB,...
- Posted 5 months ago
- 0
The Open Source community united against Covid-19
On March 11, WHO (World Health Organization) officially declared the...
- Posted 2 years ago
- 0
Coronavirus: Now Is The Time For Solidarity
The moment we are living, in China before and all...
- Posted 2 years ago
- 0
5 Types of Industrial Flowmeter
In an industrial setting, the use of flow meters...
- Posted 2 years ago
- 0

Popular
Latest
Comments

Arduino ISP (In System Programming) and stand-alone circuits
We use an Arduino to program other ATmega without...
- Posted 10 years ago
- 225
Arduino GSM shield
This is a very low...
- Posted 11 years ago
- 218
Localizer with SIM908 module
The device is based on a GSM/GPRS module with...
- Posted 9 years ago
- 186
GSM GPS shield for Arduino
Shield for Arduino designed and based on the module...
- Posted 9 years ago
- 181
Small Breakout for SIM900 GSM Module
Some post ago we presented a PCB to mount...
- Posted 11 years ago
- 115

3DRAG + MOTORFISH: How to prevent step losses in 3D printer
It solves the problem of pitch loss that can...
- Posted 2 weeks ago
- 1
Motorfish: The stepper does not misses a step (the Firmware)
Let’s describe the firmware of the stepper motor feedback...
- Posted 3 weeks ago
- 0
Plexiglass parts and 3D printed container
Set containing all the LASER-cut plexiglass parts and the...
- Posted 3 weeks ago
- 0
Strip 144 LED NEOPIXEL length 1 meter – IP67
Addressable light strip with144 high brightness, flexible and weatherproof...
- Posted 3 weeks ago
- 0
Arduino Mega Protoshield
This experimental board, made specifically for Arduino Mega, makes...
- Posted 3 weeks ago
- 0