Neutral nylon filament – 1.75 mm – 500 grams
Nylon filament specific for 3D printers complete with an extruder able to reaching high temperatures (at least 260 ° C).…
Shield Xbee (Xbee module not included)
The Xbee Shield allows an Arduino board to communicate wirelessly using Zigbee. It can be used as a serial /…
Let’s MONITOR our house with IFTTT
Let’s switch on the house lights using voice commands given through Google Assistant and the ESP demoboard for WiFi connection.…
Self-learning 433.92 MHz two-channel receiver – To Be Welded
Based on the PIC16F88-I / P microcontroller (appropriately programmed) and on the AC-RX2 hybrid receiver, tuned to 433.92 MHz, this…
Self-learning 433.92 MHz single channel receiver – To be Welded
Based on the PIC12F683-I / P microcontroller (appropriately programmed) and the 433.92 MHz hybrid receiver AC-RX2, this single-channel self-learning receiver…
TOF (Time Of Flight) with sensor VL53L0X
Breakout board based on Time of Flight technology and make use of the VL53L0X sensor, a low drop-out linear voltage…
Light Sensor Module – mounted
This breakout board make use of the Vishay TEMT6000 ambient light sensor (www.vishay.com). It is suitable for who need to…
RS485 module – mounted
This breakout board allows interfacing between a TTL serial line (for example the output of a discrete UART or integrated…
Arduino IDE 1.8.10 has been released
Hey Arduiners, Today we are releasing IDE 1.8.10 and you should try it because it’s awesome! With the support of…
PCBWay: Advanced PCB service
Sponsored by PCBWAY With more than a decade in the field of PCB prototype and fabrication, PCBWay has been committed…