Tag Archive for "pi laptop" - Open Electronics

Don't miss

hgTerm: Attractive DIY Raspberry Pi Powered Mini Laptop
hgTerm is a pocket-sized computer with a 4 inch touchscreen display, a 270 degree hinge that lets you flip it around backward, a thumb keyboard, and a 3D printed case. The whole thing runs on battery power...
- Posted 5 years ago
- 0
Spellbook: Raspberry Pi Powered Mini Laptop
Designed to resemble a spell book the mini laptop built by Hackaday member Calvin Nemo was created using TinkerCAD 3D printed outer shell which houses the Raspberry Pi Zero mini PC and other components. The general idea...
- Posted 6 years ago
- 0

SONY color camera module, 700 TV Lines
Color camera module equipped with a 1/3″ CCD sensor and...
- Posted 2 months ago
- 0
ESP32 Low Power Module
ESP32 Low Power Module, based on Espressif’s SoC capable of...
- Posted 3 months ago
- 0
Power supply latch
This power supply latch provides power to the external circuit...
- Posted 3 months ago
- 0
GSM/4G Remote Control with DTMF Commands
Two-way remote control system, based on the GSM/4G A7682E module...
- Posted 4 months ago
- 0
Acoustic amplifier – in DIY Kit
This kit creates a microphone amplifier with an output suitable...
- Posted 9 months ago
- 0
Clap sensor switch – in DIY Kit
It is capable of recognizing the sound of clapping hands...
- Posted 12 months ago
- 2
Liquid level indicator for tanks – in DIY kit
This monitoring device is useful for keeping track of the...
- Posted 12 months ago
- 0
LED candle with Breath-Activated ON/OFF – in DIY Kit
This LED candle with breath-activated ON/OFF function draws inspiration from...
- Posted 12 months ago
- 0

PCB CAD, A SELECTION GUIDE
Getting to know and evaluate the software offer for PCB,...
- Posted 3 years ago
- 0
DIY Sensor – Innovation & Implementation
A sensor converts data such as heat, light, sound,...
- Posted 4 years ago
- 0
Getting Started with the ESP32
This article is a getting started guide for the ESP32...
- Posted 5 years ago
- 0

The flame that doesn’t burn
Based on Neopixel and a special ultra-thin Arduino, it simulates...
- Posted 3 years ago
- 1
Here are the Winners from the 3Drag 3d printing contest
Here we are, eventually the contest has come to an...
- Posted 10 years ago
- 0
Updates from the 3Drag 3dprinting contest: Roland Hoffert’s Hacks
Roland Hoffert, from www.eytec.de, submitted us this 3Drag (Velleman K8200...
- Posted 10 years ago
- 0
Updates from the 3Drag 3dprinting contest: Karl Seiss’s Hack
Karl Seiss from Austria made a very clever hack to...
- Posted 10 years ago
- 0

PCB Recycling: The Core of Your Electronics Is More Valuable Than You Think
The screen you are looking at this very moment will...
- Posted 3 years ago
- 4
PCB CAD, A SELECTION GUIDE
Getting to know and evaluate the software offer for PCB,...
- Posted 3 years ago
- 0
The Open Source community united against Covid-19
On March 11, WHO (World Health Organization) officially declared the...
- Posted 4 years ago
- 0
Coronavirus: Now Is The Time For Solidarity
The moment we are living, in China before and all...
- Posted 4 years ago
- 0

Arduino ISP (In System Programming) and stand-alone circuits
We use an Arduino to program other ATmega without...
- Posted 13 years ago
- 226
Arduino GSM shield
This is a very low...
- Posted 13 years ago
- 218
Localizer with SIM908 module
The device is based on a GSM/GPRS module with...
- Posted 12 years ago
- 187
GSM GPS shield for Arduino
Shield for Arduino designed and based on the module...
- Posted 12 years ago
- 181
Small Breakout for SIM900 GSM Module
Some post ago we presented a PCB to mount...
- Posted 13 years ago
- 115

makeITcircular 2024 content launched – Part of Maker Faire Rome 2024
Applications to MakeITcircular must be in by October 3,...
- Posted 2 months ago
- 0
SONY color camera module, 700 TV Lines
Color camera module equipped with a 1/3″ CCD sensor...
- Posted 2 months ago
- 0
ESP32 Low Power Module
ESP32 Low Power Module, based on Espressif’s SoC capable...
- Posted 3 months ago
- 0
Power supply latch
This power supply latch provides power to the external...
- Posted 3 months ago
- 0
Application For Maker Faire Rome 2024: Deadline June 20th
Learn More About the Ideas, Makers + Projects at...
- Posted 3 months ago
- 0