educational tool | Open Electronics

Don't miss

Pi-Top 4: the New Go Anyware Pi-Powered Computer
As you probably guessed from the name, the pi-top 4 is the fourth product in the pi-top lineup of educational tools. The pi-top 3, for example, is a modular Raspberry Pi laptop. But, the pi-top 4 is...
- Posted 5 months ago
- 0
Codeybot: New Robot Who Teaches Coding on Kickstarter
Codeybot is an exciting two-wheel self-balancing robot that teaches the fundamentals of coding in a fun and playful way, and has been created by the robotics experts at Makeblock. The small robot packs in plenty of features,...
- Posted 3 years ago
- 0

Robot Arm with Pick & PLACE part 2
We equip the robotic arm published in the previous...
- Posted 2 weeks ago
- 0
ELECTRIC SOLDERING SET
Laboratory set for soldering electronic boards and components. Everything you...
- Posted 3 weeks ago
- 0
Pick & Place for Robotic Arm “ROBOARM”
Consisting of a small vacuum pump, a solenoid valve, a...
- Posted 3 weeks ago
- 0
Aluminum heat sink with 12 volt fan
Aluminum heat sink with 12 volt fan and 0.1 A...
- Posted 4 weeks ago
- 0
Neopixel 16X16 LED Panel WS2812B – Flexible
Combined with Arduino, Fishino, Raspberry or other microcontroller, this flexible...
- Posted 4 weeks ago
- 0

PCB CAD, A SELECTION GUIDE
Getting to know and evaluate the software offer for PCB,...
- Posted 5 months ago
- 0
The world of GIThub
Let’s learn all the aspects of the most renowned...
- Posted 8 months ago
- 0
Let’s manage a project from A to… GIT
Let’s learn about the firmware management and versioning tool...
- Posted 8 months ago
- 0

Here are the Winners from the 3Drag 3d printing contest
Here we are, eventually the contest has come to an...
- Posted 5 years ago
- 0
Updates from the 3Drag 3dprinting contest: Roland Hoffert’s Hacks
Roland Hoffert, from www.eytec.de, submitted us this 3Drag (Velleman K8200...
- Posted 5 years ago
- 0
Updates from the 3Drag 3dprinting contest: Karl Seiss’s Hack
Karl Seiss from Austria made a very clever hack to...
- Posted 5 years ago
- 0
Updates from the 3Drag 3dprinting contest: Fa)(a from Giacomo Falaschi
Giacomo Falaschi sent us his Falla3D new printer project: you...
- Posted 5 years ago
- 0

The end of the Makers movement? What happened at Maker Media?
Big financial problems for Maker Media that blocked...
- Posted 1 week ago
- 0
An innovative solution in the blockchain market: 25MB Block Size – can it be real?
Sponsored post by ILCoin In the past 10...
- Posted 1 month ago
- 0
PCB CAD, A SELECTION GUIDE
Getting to know and evaluate the software offer for PCB,...
- Posted 5 months ago
- 0
RISC-V, THE ERA OF OPEN SOURCE CPU HAS BEGUN
Open architectures for processors too? It looks like it...
- Posted 6 months ago
- 1

Arduino ISP (In System Programming) and stand-alone circuits
We use an Arduino to program other ATmega without...
- Posted 7 years ago
- 224
Arduino GSM shield
This is a very low...
- Posted 8 years ago
- 218
Localizer with SIM908 module
The device is based on a GSM/GPRS module with...
- Posted 7 years ago
- 185
GSM GPS shield for Arduino
Shield for Arduino designed and based on the module...
- Posted 7 years ago
- 180
Small Breakout for SIM900 GSM Module
Some post ago we presented a PCB to mount...
- Posted 8 years ago
- 115

Banana Pi BPI-M4: Affordable SBC with 4K Video
Banana Pi BPI-M4 is a Raspberry Pi alternative now...
- Posted 16 hours ago
- 0
MCC 134 Thermocouple Measurement HAT for Raspberry Pi
The MCC 134 Thermocouple Measurement HAT provides four thermocouple...
- Posted 2 days ago
- 0
LPS35HW Water Resistant Pressure Sensor Now Available on Adafruit
The ST LPS35HW is a water resistant barometric pressure...
- Posted 3 days ago
- 0
“MakerArt” an innovative project of synergistic pathways between international makers and artists
. It’s called Maker Art and it’s one of the...
- Posted 4 days ago
- 0
The RadioInstigator is an Affordable Signals Intelligence Platform
Circle City Con is a yearly conference that focuses...
- Posted 4 days ago
- 0