Preamplified Microphone Capsule

By Boris Landoni on August 13, 2021

Omnidirectional electret condenser microphone with 2 terminals for PCB mounting. Dimensions (mm): diameter 9.8×7.

Techical specifications

General Impedence: LOW
Standard voltage: 4.5V
Range of operating voltage: 1,5V TO 10V
Current drain: 0,5mA
Max. sensitivity: 64db ± 0,3db
S/N ratio: 60db or more
Frequency: 50HZ – 13KHZ

Go to Open-Electronics Store

OpenStore

About Boris Landoni

Boris Landoni is the technical manager of Open-Electronics.org. Skilled in the GSM field, embraces the Open Source philosophy and its projects are available to the community.

OpenSource Products

Lead-acid battery ULTRACELL – 6V 1,3Ah
Sealed rechargeable battery with a rated voltage of 6 V,...
- Posted 1 week ago
- 0
Lead-acid battery ULTRACELL – 6V 3,4Ah
Sealed rechargeable battery with a rated voltage of 6 V,...
- Posted 1 week ago
- 0
Distance Alert – Keep safety distance
Keep social distancing with an audible and optical signal that...
- Posted 2 months ago
- 0
Raspberry Pi Camera 5 Mpx
Small module for Raspberry Pi equipped with 5 megapixel camera...
- Posted 2 months ago
- 0
Complete starter kit with 8GB Raspberry Pi 4
A complete starter kit with all you need to use...
- Posted 2 months ago
- 0
Pulse Oximeter SpO2 and Heart-Rate Sensor Module MAX30100
The MAX30100 is an integrated pulse oximetry and heart rate...
- Posted 2 months ago
- 0
ABS Handheld Electronics Enclosure – COFFER2
ABS Handheld Electronics Enclosure with rounded corners and plastic panel....
- Posted 2 months ago
- 0
Pulse Oximeter and Heart-Rate Module MAX30102
The MAX30102 is integrated pulse oximetry and heart-rate monitor biosensor...
- Posted 2 months ago
- 0

Tutorials

PCB CAD, A SELECTION GUIDE
Getting to know and evaluate the software offer for PCB,...
- Posted 4 months ago
- 0
DIY Sensor – Innovation & Implementation
A sensor converts data such as heat, light, sound,...
- Posted 11 months ago
- 0
Getting Started with the ESP32
This article is a getting started guide for the ESP32...
- Posted 2 years ago
- 0

Mods and Hacks

Here are the Winners from the 3Drag 3d printing contest
Here we are, eventually the contest has come to an...
- Posted 7 years ago
- 0
Updates from the 3Drag 3dprinting contest: Roland Hoffert’s Hacks
Roland Hoffert, from www.eytec.de, submitted us this 3Drag (Velleman K8200...
- Posted 7 years ago
- 0
Updates from the 3Drag 3dprinting contest: Karl Seiss’s Hack
Karl Seiss from Austria made a very clever hack to...
- Posted 7 years ago
- 0
Updates from the 3Drag 3dprinting contest: Fa)(a from Giacomo Falaschi
Giacomo Falaschi sent us his Falla3D new printer project: you...
- Posted 7 years ago
- 0

Opinions

PCB CAD, A SELECTION GUIDE
Getting to know and evaluate the software offer for PCB,...
- Posted 4 months ago
- 0
The Open Source community united against Covid-19
On March 11, WHO (World Health Organization) officially declared the...
- Posted 2 years ago
- 0
Coronavirus: Now Is The Time For Solidarity
The moment we are living, in China before and all...
- Posted 2 years ago
- 0
5 Types of Industrial Flowmeter
In an industrial setting, the use of flow meters...
- Posted 2 years ago
- 0

Popular
Latest
Comments

Arduino ISP (In System Programming) and stand-alone circuits
We use an Arduino to program other ATmega without...
- Posted 10 years ago
- 225
Arduino GSM shield
This is a very low...
- Posted 11 years ago
- 218
Localizer with SIM908 module
The device is based on a GSM/GPRS module with...
- Posted 9 years ago
- 186
GSM GPS shield for Arduino
Shield for Arduino designed and based on the module...
- Posted 9 years ago
- 181
Small Breakout for SIM900 GSM Module
Some post ago we presented a PCB to mount...
- Posted 10 years ago
- 115

Lead-acid battery ULTRACELL – 6V 1,3Ah
Sealed rechargeable battery with a rated voltage of 6...
- Posted 1 week ago
- 0
Lead-acid battery ULTRACELL – 6V 3,4Ah
Sealed rechargeable battery with a rated voltage of 6...
- Posted 1 week ago
- 0
Automatic cereal dispenser with facial recognition
The goal of this project is to create a...
- Posted 2 weeks ago
- 0
E-Ink tide and weather tracker
The idea of this project is to show the...
- Posted 3 weeks ago
- 0
Bird Sound Classifier
The project attempts to recognize different bird calls by...
- Posted 4 weeks ago
- 0