- makeITcircular 2024 content launched – Part of Maker Faire Rome 2024Posted 2 weeks ago
- Application For Maker Faire Rome 2024: Deadline June 20thPosted 2 months ago
- Building a 3D Digital Clock with ArduinoPosted 7 months ago
- Creating a controller for Minecraft with realistic body movements using ArduinoPosted 7 months ago
- Snowflake with ArduinoPosted 8 months ago
- Holographic Christmas TreePosted 8 months ago
- Segstick: Build Your Own Self-Balancing Vehicle in Just 2 Days with ArduinoPosted 8 months ago
- ZSWatch: An Open-Source Smartwatch Project Based on the Zephyr Operating SystemPosted 9 months ago
- What is IoT and which devices to usePosted 9 months ago
- Maker Faire Rome Unveils Thrilling “Padel Smash Future” Pavilion for Sports EnthusiastsPosted 10 months ago
Orange Pi Plus2 Available Now!
Orange Pi Plus2 is for anyone who wants to start creating with technology – not just consuming it. It’s a simple, fun, useful tool that you can use to start taking control of the world around you.
Available at a price point of €95, this Raspberry Pi competitor is showing its muscles. An impressive bunch of high level features have no equals in the embedded computing world:
Hardware specification |
||
CPU | H3 Quad-core Cortex-A7 H.265/HEVC 4K | |
GPU | ·Mali400MP2 GPU @600MHz ·Supports OpenGL ES 2.0 |
|
Memory (SDRAM) | 2GB DDR3 (shared with GPU) | |
Onboard Storage | TF card (Max. 64GB) / MMC card slot , up to 2T on 2.5 SATA disk 16GB EMMC Flash |
|
Onboard Network | 10/100/1000M Ethernet RJ45 | |
Onboard WIFI | Realtek RTL8189ETV, IEEE 802.11 b/g/n | |
Video Input | A CSI input connector Camera:
Supports 8-bit YUV422 CMOS sensor interface Supports CCIR656 protocol for NTSC and PAL Supports SM pixel camera sensor Supports video capture solution up to 1080p@30fps |
|
Audio Input | MIC | |
Video Outputs | Supports HDMI output with HDCP
Supports HDMI CEC Supports HDMI 30 function Integrated CVBS Supports simultaneous output of HDMI and CVBS |
|
Audio Output | 3.5 mm Jack and HDMI | |
Power Source | DC input can supply power, but USB OTG input don’t supply power | |
USB 2.0 Ports | Four USB 2.0 HOST, one USB 2.0 OTG | |
Buttons | Power Button(SW4), Recovery Button(SW3), Uboot Button(SW2) | |
Low-level peripherals | 40 Pins Header,compatible with Raspberry Pi B+ | |
GPIO(1×3) pin | UART, ground. | |
LED | Power led & Status led | |
Other | IR input | |
Supported OS | Android, Ubuntu, Debian, Rasberry Pi Image | |
Interface definition |
||
Product size | 108mm × 67mm | |
Weight | 83g |
You can purchase it directly on our italian store!
Source: Plus2 – Orange Pi Plus2