Don't miss
- NIXIE STYLE LED DISPLAYPosted 2 months ago
- TOTEM: learning by experimentingPosted 3 months ago
- Google Assistant Voice Controlled Switch – NodeMCU IOT ProjePosted 3 months ago
- Water Softener Salt Level MonitorPosted 3 months ago
- Sparkly Air SensorPosted 3 months ago
- Ultra sonic distance finder with live statusPosted 3 months ago
- Windows interface to have total control over lampsPosted 3 months ago
- Smart AquariumPosted 3 months ago
- Wearable ProjectionPosted 3 months ago
- Write programs with the Arduino Web EditorPosted 3 months ago
Building a Raspberry Pi stratum 1 NTP server
By Emanuele Signoretta on August 7, 2020
So this article is going to be my notes on how I built one using a cheap GPS module off eBay as the reference time source and a Raspberry Pi. (a 2B in this case, but hopefully the differences for newer models will be minor; if there are any, they’re probably around the behavior of the serial port since I think things changed on the Pi3 with bluetooth support?)
Related Posts
-
Arduino ISP (In System Programming) and stand-alone circuitsWe use an Arduino to program other ATmega without...
- Posted 11 years ago
-
-
-
GSM GPS shield for ArduinoShield for Arduino designed and based on the module...
- Posted 10 years ago
-
Small Breakout for SIM900 GSM ModuleSome post ago we presented a PCB to mount...
- Posted 12 years ago
-
“Colors of Italy” the interactive map of Italy based on the latest DecreeIn Italy, during this pandemic period, Decrees of the...
- Posted 2 months ago
-
Control a Nintendo Gamecube with a PS3 controllerIf you are a lover of Retrogaming and do...
- Posted 2 months ago
-
A pull-up bar that rewards you with Tic TacsTo be more motivated during exercise, Nikolas has decided...
- Posted 2 months ago
-
-
How to emulate an Xbox controller with ArduinoA very cool project you can do with an...
- Posted 2 months ago