- How to Build a 1000W ZVS Induction Heater Using a Resonant RLC CircuitPosted 2 weeks ago
- How to Adjust X and Y Axis Scale in Arduino Serial Plotter (No Extra Software Needed)Posted 10 months ago
- Elettronici Entusiasti: Inspiring Makers at Maker Faire Rome 2024Posted 10 months ago
- makeITcircular 2024 content launched – Part of Maker Faire Rome 2024Posted 1 year ago
- Application For Maker Faire Rome 2024: Deadline June 20thPosted 1 year ago
- Building a 3D Digital Clock with ArduinoPosted 2 years ago
- Creating a controller for Minecraft with realistic body movements using ArduinoPosted 2 years ago
- Snowflake with ArduinoPosted 2 years ago
- Holographic Christmas TreePosted 2 years ago
- Segstick: Build Your Own Self-Balancing Vehicle in Just 2 Days with ArduinoPosted 2 years ago
Home Automation and Monitoring (Powered by RSL10 and Alexa)
In this project, I am going to show how I made Alexa enabled home monitoring and controlling system using RSL10 Sense Development Board from ON Semiconductor. RSL10 is used to sense the environmental parameters (temperature, humidity, air pressure, and light intensity) of a room. An Alexa Skill was developed to remotely access these parameters and give commands to control those parameters. ESP8266 based Node MCU is used to receive MQTT message and turn on/off the light, fan according to the voice command.
Related Posts
){kind=link}
One Comment
Leave a Reply
-
Arduino ISP (In System Programming) and stand-alone circuitsWe use an Arduino to program other ATmega without...
- Posted 13 years ago
-
-
-
GSM GPS shield for ArduinoShield for Arduino designed and based on the module...
- Posted 13 years ago
-
Small Breakout for SIM900 GSM ModuleSome post ago we presented a PCB to mount...
- Posted 14 years ago
-
How to Build a 1000W ZVS Induction Heater Using a Resonant RLC CircuitLet’s Melt Metals Using the ZVS (Zero Voltage Switching)...
- Posted 2 weeks ago
-
How to Control NeoPixel Installations via Wi-Fi Using Fishino and NodeMCU with PythonWe create NeoPixel light installations with Fishino and NodeMCU...
- Posted 8 months ago
-
How to Adjust X and Y Axis Scale in Arduino Serial Plotter (No Extra Software Needed)The Serial Plotter in Arduino is an excellent tool...
- Posted 10 months ago
-
Elettronici Entusiasti: Inspiring Makers at Maker Faire Rome 2024Maker Faire Rome 2024 is ready to amaze the...
- Posted 10 months ago
-
makeITcircular 2024 content launched – Part of Maker Faire Rome 2024Applications to MakeITcircular must be in by October 3,...
- Posted 1 year ago
Pingback: Domotique et surveillance (alimenté par RSL10 et Alexa) - Open Electronics -