OpenMediaVault | Open Electronics

Don't miss

Gnubee Personal Cloud 1: low-cost and low-power network-attached storage device
“The GnuBee Personal Cloud 1 (GB-PC1) is a network-attached storage (NAS) device specifically engineered to run free, libre, open source software (FLOSS). The GB-PC1 has all the functionality of any commercial, proprietary NAS, but at a much...
- Posted 2 years ago
- 0
Helios4 the 1st DIY ARM board computer designed for NAS
The Helios4 team is launching a Kickstarter campaign for the 1st Open Source and Open Hardware NAS (Network Attached Storage). Along the lines of Raspberry PI success, Helios4 is driving the way in open source collaborative approach...
- Posted 2 years ago
- 4

ROBOTIC Arm in plexiglass part 1
We create our first robotic arm with four degrees...
- Posted 1 day ago
- 0
Switching-mode power supply 350W 12V
Laboratory power supply in high efficiency switching technology. Metal case,...
- Posted 2 days ago
- 0
Heated plate in aluminum for 3D printer
Made of aluminum with a thickness of 3 mm this...
- Posted 2 days ago
- 0
Camera module 8 Megapixel for Raspberry Pi
Small module for Raspberry Pi with 8-megapixel Sony IMX219PQ image...
- Posted 5 days ago
- 0
NODE MCU ESP8266
Based on the ESP8266 Wi-Fi transceiver module and the CP2102...
- Posted 5 days ago
- 0

PCB CAD, A SELECTION GUIDE
Getting to know and evaluate the software offer for PCB,...
- Posted 4 months ago
- 0
The world of GIThub
Let’s learn all the aspects of the most renowned...
- Posted 7 months ago
- 0
Let’s manage a project from A to… GIT
Let’s learn about the firmware management and versioning tool...
- Posted 7 months ago
- 0

Here are the Winners from the 3Drag 3d printing contest
Here we are, eventually the contest has come to an...
- Posted 5 years ago
- 0
Updates from the 3Drag 3dprinting contest: Roland Hoffert’s Hacks
Roland Hoffert, from www.eytec.de, submitted us this 3Drag (Velleman K8200...
- Posted 5 years ago
- 0
Updates from the 3Drag 3dprinting contest: Karl Seiss’s Hack
Karl Seiss from Austria made a very clever hack to...
- Posted 5 years ago
- 0
Updates from the 3Drag 3dprinting contest: Fa)(a from Giacomo Falaschi
Giacomo Falaschi sent us his Falla3D new printer project: you...
- Posted 5 years ago
- 0

An innovative solution in the blockchain market: 25MB Block Size – can it be real?
Sponsored post by ILCoin In the past 10...
- Posted 1 week ago
- 0
PCB CAD, A SELECTION GUIDE
Getting to know and evaluate the software offer for PCB,...
- Posted 4 months ago
- 0
RISC-V, THE ERA OF OPEN SOURCE CPU HAS BEGUN
Open architectures for processors too? It looks like it...
- Posted 5 months ago
- 1
Things You Didn’t Know Could Be Open Source
There are a number of different factors that led...
- Posted 1 year ago
- 0

Arduino ISP (In System Programming) and stand-alone circuits
We use an Arduino to program other ATmega without...
- Posted 7 years ago
- 224
Arduino GSM shield
This is a very low...
- Posted 8 years ago
- 218
Localizer with SIM908 module
The device is based on a GSM/GPRS module with...
- Posted 7 years ago
- 185
GSM GPS shield for Arduino
Shield for Arduino designed and based on the module...
- Posted 7 years ago
- 180
Small Breakout for SIM900 GSM Module
Some post ago we presented a PCB to mount...
- Posted 8 years ago
- 115

Four New Affordable and Powerful Arduino Nano Boards
Arduino announced a new family of affordable, low-power Nano...
- Posted 5 hours ago
- 0
PiChuck: Wii Nunchuk Built-in Raspberry Pi Joystick Controller
The Wii Nunchuk controller is the notorious official Nintendo...
- Posted 1 day ago
- 0
ROBOTIC Arm in plexiglass part 1
We create our first robotic arm with four...
- Posted 1 day ago
- 0
Switching-mode power supply 350W 12V
Laboratory power supply in high efficiency switching technology. Metal...
- Posted 2 days ago
- 0
Heated plate in aluminum for 3D printer
Made of aluminum with a thickness of 3 mm...
- Posted 2 days ago
- 0