OOK | Open Electronics

Don't miss

LoRa remote control
Palmtop transmitter to couple with the LoRa Shield to execute longer-range radio commands. Among the longer distance radio transmission technologies with low energy consumption, there was one in particular on which we have focused our attention,...
- Posted 1 year ago
- 1

ANTENNINO a gateway for the IoT – ThingsBoard
Let’s make a Dashboard for the gateway Antennino network,...
- Posted 3 weeks ago
- 0
Soldering Gun With Solder Wire
This dual temperature soldering gun is with trigger operated solder...
- Posted 1 month ago
- 0
Soldering station ZD-8906L
Soldering station ZD-8906L Specifications Input voltage: 230V / 50Hz Power...
- Posted 1 month ago
- 0
Winding wire Ø1.5mm – 21m – 0.2 ohm
This enamelled solderable soft copper wire is used to wind...
- Posted 1 month ago
- 0
Winding wire Ø1.0mm – 16m – 0.35 ohm
This enamelled solderable soft copper wire is used to wind...
- Posted 1 month ago
- 0
Winding wire Ø0.8mm – 22m – 0.75 ohm
This enamelled solderable soft copper wire is used to wind...
- Posted 1 month ago
- 0
Winding wire Ø0.5mm – 43m – 3.7 ohm
This enamelled solderable soft copper wire is used to wind...
- Posted 1 month ago
- 0
Winding wire Ø0.3mm – 80m – 19 ohm
This enamelled solderable soft copper wire is used to wind...
- Posted 1 month ago
- 0

Getting Started with the ESP32
This article is a getting started guide for the ESP32...
- Posted 2 weeks ago
- 0
PCB CAD, A SELECTION GUIDE
Getting to know and evaluate the software offer for PCB,...
- Posted 10 months ago
- 0
The world of GIThub
Let’s learn all the aspects of the most renowned...
- Posted 1 year ago
- 0

Here are the Winners from the 3Drag 3d printing contest
Here we are, eventually the contest has come to an...
- Posted 5 years ago
- 0
Updates from the 3Drag 3dprinting contest: Roland Hoffert’s Hacks
Roland Hoffert, from www.eytec.de, submitted us this 3Drag (Velleman K8200...
- Posted 5 years ago
- 0
Updates from the 3Drag 3dprinting contest: Karl Seiss’s Hack
Karl Seiss from Austria made a very clever hack to...
- Posted 5 years ago
- 0
Updates from the 3Drag 3dprinting contest: Fa)(a from Giacomo Falaschi
Giacomo Falaschi sent us his Falla3D new printer project: you...
- Posted 5 years ago
- 0

The Best Gadgets for Seniors That Will Help Improve Their Everyday Lives
The majority of adults would, for the most part, rather...
- Posted 3 months ago
- 0
What Neural Networks/Deep Learning Books Should I Read?
There are lots of deep learning books on the...
- Posted 3 months ago
- 0
Bitcoin & Blockchain
We are going to take advantage of one of...
- Posted 5 months ago
- 0
The end of the Makers movement? What happened at Maker Media?
Big financial problems for Maker Media that blocked...
- Posted 5 months ago
- 1

Arduino ISP (In System Programming) and stand-alone circuits
We use an Arduino to program other ATmega without...
- Posted 8 years ago
- 224
Arduino GSM shield
This is a very low...
- Posted 9 years ago
- 218
Localizer with SIM908 module
The device is based on a GSM/GPRS module with...
- Posted 7 years ago
- 185
GSM GPS shield for Arduino
Shield for Arduino designed and based on the module...
- Posted 7 years ago
- 180
Small Breakout for SIM900 GSM Module
Some post ago we presented a PCB to mount...
- Posted 8 years ago
- 115

Getting Started with the ESP32
This article is a getting started guide for the...
- Posted 2 weeks ago
- 0
Which is the best BeagleBoard?
We compare eight of BeagleBoard’s best embedded development boards so...
- Posted 2 weeks ago
- 0
BubBowl: Display Vessel Using Electrolysis Bubbles in Drinkable Beverages
Ads, notifications, and other messages surround us today, and...
- Posted 2 weeks ago
- 0
A Spooky DIY Hologram
Paul from Litiholo wrote us to show off a...
- Posted 3 weeks ago
- 0
Arduino powered Haunted Mansion display
After I started learning to program my...
- Posted 3 weeks ago
- 0