ODROID-C2/XU4 | Open Electronics

Don't miss

Diskio Pi: the DIY Tablet Kit for Raspberry Pi Once Again on Kickstarter
Last year we wrote about a DIY tablet kit for Raspberry Pi, ODROID-C2/XU4 and other compatible boards launched via Kickstarter: it was the modular and fully hackable hardware Diskio Pi project. But unfortunately it failed likely due to the high...
- Posted 11 months ago
- 0

Winding wire Ø0.8mm – 22m – 0.75 ohm
This enamelled solderable soft copper wire is used to wind...
- Posted 22 mins ago
- 0
Winding wire Ø0.5mm – 43m – 3.7 ohm
This enamelled solderable soft copper wire is used to wind...
- Posted 22 mins ago
- 0
Winding wire Ø0.3mm – 80m – 19 ohm
This enamelled solderable soft copper wire is used to wind...
- Posted 1 hour ago
- 0
Winding wire Ø0.2mm – 178m – 97 ohm
This enamelled solderable soft copper wire is used to wind...
- Posted 1 hour ago
- 0
WINDING WIRE Ø0.1mm – 715m – 1.5kohm
This enamelled solderable soft copper wire is used to wind...
- Posted 3 hours ago
- 0
Telephone cable 6 x 0.08mm white flat
Features colour: white shape: flat size: 6 x 0.08mm² insulation:...
- Posted 5 hours ago
- 0
TELEPHONE CABLE 4 x 0.08mm WHITE FLAT – 100 m
Features colour: white shape: flat size: 4 x 0.08mm² insulation:...
- Posted 3 days ago
- 0
Small solar cell (2 V / 200 mA)
Small polycrystalline photovoltaic cell, suitable for performing experiments with solar...
- Posted 3 days ago
- 0

PCB CAD, A SELECTION GUIDE
Getting to know and evaluate the software offer for PCB,...
- Posted 9 months ago
- 0
The world of GIThub
Let’s learn all the aspects of the most renowned...
- Posted 12 months ago
- 0
Let’s manage a project from A to… GIT
Let’s learn about the firmware management and versioning tool...
- Posted 12 months ago
- 0

Here are the Winners from the 3Drag 3d printing contest
Here we are, eventually the contest has come to an...
- Posted 5 years ago
- 0
Updates from the 3Drag 3dprinting contest: Roland Hoffert’s Hacks
Roland Hoffert, from www.eytec.de, submitted us this 3Drag (Velleman K8200...
- Posted 5 years ago
- 0
Updates from the 3Drag 3dprinting contest: Karl Seiss’s Hack
Karl Seiss from Austria made a very clever hack to...
- Posted 5 years ago
- 0
Updates from the 3Drag 3dprinting contest: Fa)(a from Giacomo Falaschi
Giacomo Falaschi sent us his Falla3D new printer project: you...
- Posted 5 years ago
- 0

The Best Gadgets for Seniors That Will Help Improve Their Everyday Lives
The majority of adults would, for the most part, rather...
- Posted 2 months ago
- 0
What Neural Networks/Deep Learning Books Should I Read?
There are lots of deep learning books on the...
- Posted 2 months ago
- 0
Bitcoin & Blockchain
We are going to take advantage of one of...
- Posted 4 months ago
- 0
The end of the Makers movement? What happened at Maker Media?
Big financial problems for Maker Media that blocked...
- Posted 4 months ago
- 1

Arduino ISP (In System Programming) and stand-alone circuits
We use an Arduino to program other ATmega without...
- Posted 8 years ago
- 224
Arduino GSM shield
This is a very low...
- Posted 9 years ago
- 218
Localizer with SIM908 module
The device is based on a GSM/GPRS module with...
- Posted 7 years ago
- 185
GSM GPS shield for Arduino
Shield for Arduino designed and based on the module...
- Posted 7 years ago
- 180
Small Breakout for SIM900 GSM Module
Some post ago we presented a PCB to mount...
- Posted 8 years ago
- 115

Introducing the new Strato Pi CM Duo: bringing high-reliability to edge computing
From Sferalabs news Today we are very excited to...
- Posted 14 mins ago
- 0
Winding wire Ø0.8mm – 22m – 0.75 ohm
This enamelled solderable soft copper wire is used to...
- Posted 22 mins ago
- 0
Winding wire Ø0.5mm – 43m – 3.7 ohm
This enamelled solderable soft copper wire is used to...
- Posted 22 mins ago
- 0
Winding wire Ø0.3mm – 80m – 19 ohm
This enamelled solderable soft copper wire is used to...
- Posted 1 hour ago
- 0
Winding wire Ø0.2mm – 178m – 97 ohm
This enamelled solderable soft copper wire is used to...
- Posted 1 hour ago
- 0