mechanical keyboard | Open Electronics

Don't miss

3D Printed Composite Keyboard Switch Prototype
Researchers Alec Peery and Dušan Sorma at Ohio University have been exploring a mechanical keyboard concept with a 3D-printed dampener built in, to avoid typing injuries. In fact the average computer user applies two to seven times...
- Posted 9 months ago
- 0

High precision pressure sensor
Breakout board based on the OMRON 2SMPB-02E pressure and humidity...
- Posted 5 days ago
- 0
Dedicated Cooling Fan for Jetson Nano
Dedicated Cooling Fan for Jetson Nano, PWM Speed Adjustment, Strong...
- Posted 2 weeks ago
- 0
HEX3653 FM 76-108 MHz Radio Receiver
The module is based on a HEX3653 IC which is...
- Posted 2 weeks ago
- 0
NEXTION Display NX8048T070 – 7 Inch
The NX8048T070 is a display of the NEXTION family that...
- Posted 4 weeks ago
- 0
NEXTION display NX3224T028 2,8 Inch
The NX3224T028 is a display of the NEXTION family which...
- Posted 4 weeks ago
- 0
NEXTION display NX3224T024 2,4 Inch
The NX3224T024 is a NEXTION family display which differs from...
- Posted 4 weeks ago
- 0
Mercury System: IoT & Connectivity Made Simple
Modular development system that simplifies connectivity and IoT applications:...
- Posted 4 weeks ago
- 1
Micro:bit Smart Car
A multifunction platform built around BBC’s micro:bit educational board. It...
- Posted 1 month ago
- 1

PCB CAD, A SELECTION GUIDE
Getting to know and evaluate the software offer for PCB,...
- Posted 7 months ago
- 0
The world of GIThub
Let’s learn all the aspects of the most renowned...
- Posted 10 months ago
- 0
Let’s manage a project from A to… GIT
Let’s learn about the firmware management and versioning tool...
- Posted 10 months ago
- 0

Here are the Winners from the 3Drag 3d printing contest
Here we are, eventually the contest has come to an...
- Posted 5 years ago
- 0
Updates from the 3Drag 3dprinting contest: Roland Hoffert’s Hacks
Roland Hoffert, from www.eytec.de, submitted us this 3Drag (Velleman K8200...
- Posted 5 years ago
- 0
Updates from the 3Drag 3dprinting contest: Karl Seiss’s Hack
Karl Seiss from Austria made a very clever hack to...
- Posted 5 years ago
- 0
Updates from the 3Drag 3dprinting contest: Fa)(a from Giacomo Falaschi
Giacomo Falaschi sent us his Falla3D new printer project: you...
- Posted 5 years ago
- 0

What Neural Networks/Deep Learning Books Should I Read?
There are lots of deep learning books on the...
- Posted 6 days ago
- 0
Bitcoin & Blockchain
We are going to take advantage of one of...
- Posted 2 months ago
- 0
The end of the Makers movement? What happened at Maker Media?
Big financial problems for Maker Media that blocked...
- Posted 2 months ago
- 1
An innovative solution in the blockchain market: 25MB Block Size – can it be real?
Sponsored post by ILCoin In the past 10...
- Posted 3 months ago
- 0

Arduino ISP (In System Programming) and stand-alone circuits
We use an Arduino to program other ATmega without...
- Posted 7 years ago
- 224
Arduino GSM shield
This is a very low...
- Posted 8 years ago
- 218
Localizer with SIM908 module
The device is based on a GSM/GPRS module with...
- Posted 7 years ago
- 185
GSM GPS shield for Arduino
Shield for Arduino designed and based on the module...
- Posted 7 years ago
- 180
Small Breakout for SIM900 GSM Module
Some post ago we presented a PCB to mount...
- Posted 8 years ago
- 115

A Rust library for generating cryptocurrency wallets
Wagyu is a lightweight command-line utility to generate...
- Posted 1 day ago
- 0
Solar is now cheaper than grid electricity
Solar power has become cheaper than grid electricity...
- Posted 2 days ago
- 0
Supercomputers will start building a 3D map of the world
The National Geospatial-Intelligence Agency is teaming up with the...
- Posted 3 days ago
- 0
What’s Next in Conversational AI
Nvidia’s GPU-powered platform for developing and running conversational...
- Posted 4 days ago
- 0
High precision pressure sensor
Breakout board based on the OMRON 2SMPB-02E pressure and...
- Posted 5 days ago
- 0