Tag Archive for "LPS35HW" - Open Electronics

Don't miss

LPS35HW Water Resistant Pressure Sensor Now Available on Adafruit
The ST LPS35HW is a water resistant barometric pressure and temperature sensor that is also safe to use in wet environments. In fact it combines protection from water intrusion with support for high precision relative and absolute...
- Posted 2 years ago
- 0

Amplified microwave motion sensor
Compact module that integrates the microwave motion sensor based on...
- Posted 2 weeks ago
- 0
24V DC MOTOR – 12,000 RPM
Powerful motor with 24V dc power supply and a rated...
- Posted 3 weeks ago
- 0
Raspberry Pi Relay Board
8 relays controlled by 8 opto-isolated digital lines or by...
- Posted 4 weeks ago
- 0
Raspberry Pi 4 Model B 4GB
Raspberry Pi 4 Model B is the fourth generation produced...
- Posted 2 months ago
- 0
Raspberry Pi 4 Model B 8GB
Raspberry Pi 4 Model B is the fourth generation produced...
- Posted 2 months ago
- 0
How to use load cells
The sensors and electronics needed to measure the weight of...
- Posted 4 months ago
- 0
Weather station with a Lightning detector, UV sensor, Temperature, Humidity, Pressure, and more
We build a Fishino-powered weather station that allows you to...
- Posted 4 months ago
- 0
Electronic Cricket
Can be used for recreational purposes or to simulate a...
- Posted 5 months ago
- 0

PCB CAD, A SELECTION GUIDE
Getting to know and evaluate the software offer for PCB,...
- Posted 1 month ago
- 0
DIY Sensor – Innovation & Implementation
A sensor converts data such as heat, light, sound,...
- Posted 9 months ago
- 0
Getting Started with the ESP32
This article is a getting started guide for the ESP32...
- Posted 2 years ago
- 0

Here are the Winners from the 3Drag 3d printing contest
Here we are, eventually the contest has come to an...
- Posted 7 years ago
- 0
Updates from the 3Drag 3dprinting contest: Roland Hoffert’s Hacks
Roland Hoffert, from www.eytec.de, submitted us this 3Drag (Velleman K8200...
- Posted 7 years ago
- 0
Updates from the 3Drag 3dprinting contest: Karl Seiss’s Hack
Karl Seiss from Austria made a very clever hack to...
- Posted 7 years ago
- 0
Updates from the 3Drag 3dprinting contest: Fa)(a from Giacomo Falaschi
Giacomo Falaschi sent us his Falla3D new printer project: you...
- Posted 7 years ago
- 0

PCB CAD, A SELECTION GUIDE
Getting to know and evaluate the software offer for PCB,...
- Posted 1 month ago
- 0
The Open Source community united against Covid-19
On March 11, WHO (World Health Organization) officially declared the...
- Posted 1 year ago
- 0
Coronavirus: Now Is The Time For Solidarity
The moment we are living, in China before and all...
- Posted 1 year ago
- 0
5 Types of Industrial Flowmeter
In an industrial setting, the use of flow meters...
- Posted 1 year ago
- 0

Arduino ISP (In System Programming) and stand-alone circuits
We use an Arduino to program other ATmega without...
- Posted 9 years ago
- 225
Arduino GSM shield
This is a very low...
- Posted 10 years ago
- 218
Localizer with SIM908 module
The device is based on a GSM/GPRS module with...
- Posted 9 years ago
- 186
GSM GPS shield for Arduino
Shield for Arduino designed and based on the module...
- Posted 9 years ago
- 181
Small Breakout for SIM900 GSM Module
Some post ago we presented a PCB to mount...
- Posted 10 years ago
- 115

Build a logic Probe TTL / CMOS
In this project we see how to build a...
- Posted 24 hours ago
- 0
Magnetic levitation with Arduino
Lately we see many commercial products that allow you...
- Posted 2 days ago
- 0
A fridge that follows our movements
In this project an Arduino Uno was used to...
- Posted 3 days ago
- 0
DIY home automation greenhouse
In this project we will see how to build...
- Posted 4 days ago
- 0
Bathroom ventilation fan controller with Arduino
In this project we are looking for a solution...
- Posted 5 days ago
- 0