Source Parts | Open Electronics

Don't miss

C.H.I.P. Form Factor Is Back via PopCorn Computer
C.H.I.P was a $9 Linux computer launched in 2015 by Next Things Co., and followed by the $16 C.H.I.P Pro in 2016. Sadly the company eventually encountered financial troubles and had to fold last year. But the...
- Posted 3 months ago
- 0

IONOPI_RTC MODULE I/O PI WITH RTC
Iono Pi RTC an extremely versatile Input/Output module, based on...
- Posted 4 hours ago
- 0
Pololu ball caster with 1.8 cm metal ball
The ball caster is used as a third support point...
- Posted 5 hours ago
- 0
Pololu ball caster with metal ball 1 cm
The ball caster is used as the third foothold in...
- Posted 6 hours ago
- 0
Matrix display bicolored LED 3mm 32×16
Matrix display made of 8 digits with 64 two-color 3...
- Posted 7 hours ago
- 0
Light wood filament 1.75 mm – 500 grams
High quality filament made of recycled wood and a polymer...
- Posted 7 hours ago
- 0
Dual display 7 segment 2,3
7-segment 2-digit display with common anode and red LED with...
- Posted 8 hours ago
- 0
Driver for dual display 7 segments
Based on the PIC16F690 microcontroller, this driver board allows you...
- Posted 10 hours ago
- 0
Driver for double display 7 segments
Based on the PIC16F690 microcontroller, this driver board allows you...
- Posted 11 hours ago
- 0

PCB CAD, A SELECTION GUIDE
Getting to know and evaluate the software offer for PCB,...
- Posted 8 months ago
- 0
The world of GIThub
Let’s learn all the aspects of the most renowned...
- Posted 11 months ago
- 0
Let’s manage a project from A to… GIT
Let’s learn about the firmware management and versioning tool...
- Posted 11 months ago
- 0

Here are the Winners from the 3Drag 3d printing contest
Here we are, eventually the contest has come to an...
- Posted 5 years ago
- 0
Updates from the 3Drag 3dprinting contest: Roland Hoffert’s Hacks
Roland Hoffert, from www.eytec.de, submitted us this 3Drag (Velleman K8200...
- Posted 5 years ago
- 0
Updates from the 3Drag 3dprinting contest: Karl Seiss’s Hack
Karl Seiss from Austria made a very clever hack to...
- Posted 5 years ago
- 0
Updates from the 3Drag 3dprinting contest: Fa)(a from Giacomo Falaschi
Giacomo Falaschi sent us his Falla3D new printer project: you...
- Posted 5 years ago
- 0

The Best Gadgets for Seniors That Will Help Improve Their Everyday Lives
The majority of adults would, for the most part, rather...
- Posted 1 month ago
- 0
What Neural Networks/Deep Learning Books Should I Read?
There are lots of deep learning books on the...
- Posted 1 month ago
- 0
Bitcoin & Blockchain
We are going to take advantage of one of...
- Posted 3 months ago
- 0
The end of the Makers movement? What happened at Maker Media?
Big financial problems for Maker Media that blocked...
- Posted 3 months ago
- 1

Arduino ISP (In System Programming) and stand-alone circuits
We use an Arduino to program other ATmega without...
- Posted 8 years ago
- 224
Arduino GSM shield
This is a very low...
- Posted 9 years ago
- 218
Localizer with SIM908 module
The device is based on a GSM/GPRS module with...
- Posted 7 years ago
- 185
GSM GPS shield for Arduino
Shield for Arduino designed and based on the module...
- Posted 7 years ago
- 180
Small Breakout for SIM900 GSM Module
Some post ago we presented a PCB to mount...
- Posted 8 years ago
- 115

IONOPI_RTC MODULE I/O PI WITH RTC
Iono Pi RTC an extremely versatile Input/Output module, based...
- Posted 4 hours ago
- 0
Pololu ball caster with 1.8 cm metal ball
The ball caster is used as a third support...
- Posted 5 hours ago
- 0
Pololu ball caster with metal ball 1 cm
The ball caster is used as the third foothold...
- Posted 6 hours ago
- 0
Matrix display bicolored LED 3mm 32×16
Matrix display made of 8 digits with 64 two-color...
- Posted 7 hours ago
- 0
Light wood filament 1.75 mm – 500 grams
High quality filament made of recycled wood and a...
- Posted 7 hours ago
- 0