chess challenger | Open Electronics

Don't miss

DIY a Raspberry Pi Zero Powered Chess Challenger
This Raspberry Pi Zero powered retro themed Chess Challenger, is an open source hardware design capable of running an up to date open source chess engine, Stockfish. The original game was devised by Fidelity Electronics, and took...
- Posted 7 months ago
- 0

High precision pressure sensor
Breakout board based on the OMRON 2SMPB-02E pressure and humidity...
- Posted 5 days ago
- 0
Dedicated Cooling Fan for Jetson Nano
Dedicated Cooling Fan for Jetson Nano, PWM Speed Adjustment, Strong...
- Posted 2 weeks ago
- 0
HEX3653 FM 76-108 MHz Radio Receiver
The module is based on a HEX3653 IC which is...
- Posted 2 weeks ago
- 0
NEXTION Display NX8048T070 – 7 Inch
The NX8048T070 is a display of the NEXTION family that...
- Posted 4 weeks ago
- 0
NEXTION display NX3224T028 2,8 Inch
The NX3224T028 is a display of the NEXTION family which...
- Posted 4 weeks ago
- 0
NEXTION display NX3224T024 2,4 Inch
The NX3224T024 is a NEXTION family display which differs from...
- Posted 4 weeks ago
- 0
Mercury System: IoT & Connectivity Made Simple
Modular development system that simplifies connectivity and IoT applications:...
- Posted 4 weeks ago
- 1
Micro:bit Smart Car
A multifunction platform built around BBC’s micro:bit educational board. It...
- Posted 1 month ago
- 1

PCB CAD, A SELECTION GUIDE
Getting to know and evaluate the software offer for PCB,...
- Posted 7 months ago
- 0
The world of GIThub
Let’s learn all the aspects of the most renowned...
- Posted 10 months ago
- 0
Let’s manage a project from A to… GIT
Let’s learn about the firmware management and versioning tool...
- Posted 10 months ago
- 0

Here are the Winners from the 3Drag 3d printing contest
Here we are, eventually the contest has come to an...
- Posted 5 years ago
- 0
Updates from the 3Drag 3dprinting contest: Roland Hoffert’s Hacks
Roland Hoffert, from www.eytec.de, submitted us this 3Drag (Velleman K8200...
- Posted 5 years ago
- 0
Updates from the 3Drag 3dprinting contest: Karl Seiss’s Hack
Karl Seiss from Austria made a very clever hack to...
- Posted 5 years ago
- 0
Updates from the 3Drag 3dprinting contest: Fa)(a from Giacomo Falaschi
Giacomo Falaschi sent us his Falla3D new printer project: you...
- Posted 5 years ago
- 0

What Neural Networks/Deep Learning Books Should I Read?
There are lots of deep learning books on the...
- Posted 6 days ago
- 0
Bitcoin & Blockchain
We are going to take advantage of one of...
- Posted 2 months ago
- 0
The end of the Makers movement? What happened at Maker Media?
Big financial problems for Maker Media that blocked...
- Posted 2 months ago
- 1
An innovative solution in the blockchain market: 25MB Block Size – can it be real?
Sponsored post by ILCoin In the past 10...
- Posted 3 months ago
- 0

Arduino ISP (In System Programming) and stand-alone circuits
We use an Arduino to program other ATmega without...
- Posted 7 years ago
- 224
Arduino GSM shield
This is a very low...
- Posted 8 years ago
- 218
Localizer with SIM908 module
The device is based on a GSM/GPRS module with...
- Posted 7 years ago
- 185
GSM GPS shield for Arduino
Shield for Arduino designed and based on the module...
- Posted 7 years ago
- 180
Small Breakout for SIM900 GSM Module
Some post ago we presented a PCB to mount...
- Posted 8 years ago
- 115

A Rust library for generating cryptocurrency wallets
Wagyu is a lightweight command-line utility to generate...
- Posted 1 day ago
- 0
Solar is now cheaper than grid electricity
Solar power has become cheaper than grid electricity...
- Posted 2 days ago
- 0
Supercomputers will start building a 3D map of the world
The National Geospatial-Intelligence Agency is teaming up with the...
- Posted 3 days ago
- 0
What’s Next in Conversational AI
Nvidia’s GPU-powered platform for developing and running conversational...
- Posted 4 days ago
- 0
High precision pressure sensor
Breakout board based on the OMRON 2SMPB-02E pressure and...
- Posted 5 days ago
- 0