Tag Archive for "Bee form" - Open Electronics

Don't miss

SuperB Open Source Module Adds Wifi and Bluetooth to Your Project
The SuperB module is made by Macchina, the company that describes its product as the perfect marriage of two of hardware’s ubiquitous names : the Bee form factor and ESP32. In fact the SuperB module allow you to easily add...
- Posted 1 year ago
- 0

GSM modem with USB
We make a device that allows GPRS connectivity via...
- Posted 3 months ago
- 0
GPS L80-R module with antenna
66-channel GPS receiver module with patch antenna, UART interface: 4800-115.200bps...
- Posted 3 months ago
- 0
1D and 2D Barcode reader module
Compact and high-performance module capable of reading linear (Code 39,...
- Posted 3 months ago
- 0
128×64 OLED display – white characters
Module with 2.42″, 128×64 pixel OLED (Organic Light Emitting Diode)...
- Posted 3 months ago
- 0
3.5inch Touch LCD Shield for Arduino
Shield for Arduino Uno consisting of a TFT LCD display...
- Posted 3 months ago
- 0
Fingerprint reader with AS608 chip
Optical fingerprint reader, equipped with high-speed DSP processor, high-performance recognition...
- Posted 3 months ago
- 0
DC12V 15W LED COB Light Strip – length 20 cm
Bar with red COB LEDs covered with silicone rubber and...
- Posted 3 months ago
- 0
DC12V 15W LED COB Light Strip – length 20 cm
Bar with green COB LEDs covered with silicone rubber and...
- Posted 3 months ago
- 0

Here are the Winners from the 3Drag 3d printing contest
Here we are, eventually the contest has come to an...
- Posted 6 years ago
- 0
Updates from the 3Drag 3dprinting contest: Roland Hoffert’s Hacks
Roland Hoffert, from www.eytec.de, submitted us this 3Drag (Velleman K8200...
- Posted 6 years ago
- 0
Updates from the 3Drag 3dprinting contest: Karl Seiss’s Hack
Karl Seiss from Austria made a very clever hack to...
- Posted 6 years ago
- 0
Updates from the 3Drag 3dprinting contest: Fa)(a from Giacomo Falaschi
Giacomo Falaschi sent us his Falla3D new printer project: you...
- Posted 6 years ago
- 0

The Open Source community united against Covid-19
On March 11, WHO (World Health Organization) officially declared the...
- Posted 2 months ago
- 0
Coronavirus: Now Is The Time For Solidarity
The moment we are living, in China before and all...
- Posted 2 months ago
- 0
5 Types of Industrial Flowmeter
In an industrial setting, the use of flow meters...
- Posted 2 months ago
- 0
The Best Gadgets for Seniors That Will Help Improve Their Everyday Lives
The majority of adults would, for the most part, rather...
- Posted 9 months ago
- 0

Arduino ISP (In System Programming) and stand-alone circuits
We use an Arduino to program other ATmega without...
- Posted 8 years ago
- 224
Arduino GSM shield
This is a very low...
- Posted 9 years ago
- 218
Localizer with SIM908 module
The device is based on a GSM/GPRS module with...
- Posted 8 years ago
- 185
GSM GPS shield for Arduino
Shield for Arduino designed and based on the module...
- Posted 8 years ago
- 181
Small Breakout for SIM900 GSM Module
Some post ago we presented a PCB to mount...
- Posted 9 years ago
- 115

Creality CR-6 SE Leveling-free DIY 3D Printer Kit
From printing urgently needed medical equipment to cater to...
- Posted 2 weeks ago
- 0
Request Sensor Data via SMS using Arduino and SIM900 GSM Shield
In this project we’re going to show you...
- Posted 3 weeks ago
- 2
FotoFish
FotoFish is a polaroid camera project, which uses...
- Posted 3 weeks ago
- 2
This SpaceX fan created a levitating Starship lamp
Although you might not be able to build or house...
- Posted 3 weeks ago
- 2
Monitor your home with this Nano 33 IoT-based system
Using an Arduino Nano 33 IoT, Jithin Sanal designed...
- Posted 4 weeks ago
- 2