MCC 134 Thermocouple Measurement HAT for Raspberry Pi

By on June 16, 2019
Pin It

The MCC 134 Thermocouple Measurement HAT provides four thermocouple inputs for adding temperature measurement capability to Raspberry Pi based systems (Raspberry Pi 3 3B+, 3, 2, and A+ models.).

The MCC 134 also offers open thermocouple detection so users can monitor for broken or disconnected thermocouples. Each channel type is selectable on a per-channel basis. The board provides a HAT-compatible 40-pin GPIO for easy installation. Other features include a 24-bit A/D converter, 3x cold-junction compensation (CJC) sensors, and linearization features.

You can use up to 8x MCC DAQ HATs per a single Raspberry Pi and all these HATs are controlled by the same open source Raspbian Linux stack with easy-to-use C/C++ and Python open source libraries.

The MCC 134 expands the Measurement Computing Corp HATs family flanking the MCC 118 voltage measurement DAQ HAT with eight ±10 V inputs and sample rates up to 100 kS/s and the MCC 152 voltage output and digital I/O HAT with dual 0-5 V analog outputs at up to 5 kS/s and 8x configurable DIO.



jlcpcb.com

About Luca Ruggeri

Leave a Reply