• featherproto
    A Quick Rundown on Adafruit’s Feather Ecosystem

    Adafruit began their Feather ecosystem endeavor last year with the introduction of the Feather 32u4 Basic Proto, a tiny (51mm×23mm×8mm) development board outfitted with an ATmega32u4 SoC, 20 GPIO pin-out and an onboard prototyping section. What made...

    • Posted 1 month ago
    • 0
  • 1222-04
    Adafruit GEMMA v2 – Miniature wearable electronic platform

      Dedicated to wearable electronics, Adafruit presents the GEMMA V2 evolution, basically very simile to V1 but with an on/off switch and a different connector. Here are the details: The Attiny85 is a fun processor because despite...

    • Posted 7 months ago
    • 0
  • curatori-03
    Maker Faire Rome Starts today!

    The third edition of Maker Faire The European Edition starts today with the special event at Mercati Traianei in Rome, featuring Riccardo Luna and Massimo Banzi in the special 4 days event, until October 18th, that will...

    • Posted 1 year ago
    • 0
  • copertina
    From Arduino to Genuino, the reasons for a choice

      Two websites, the company’s going public, lawsuits in many parts of the world: what is happening at Arduino’s? Everything will be made clear in this interview with Massimo Banzi, a few hours after the launch of...

    • Posted 1 year ago
    • 2
  • wetterhaus
    Arduino Projects 2/3: A traditional weather house gets a smart upgrade

    The “Enchanted Cottage” is a project by Andy Clark with the aim of upgrading a traditional  german “wetter haus”  with a new mechanism and electronics running on Arduino Yún: The mechanics were replaced with a servo and 3D...

    • Posted 1 year ago
    • 1
  • fig_0
    Touch Display for Raspberry Pi

    We add to Raspberry Pi a TFT touch screen to display the system console, movies and favorite photos or control a relay board … at your fingertips, literally! To avoid using an HDMI monitor the cost well above...

    • Posted 2 years ago
    • 4
  • arsenio-banzi
    Maker Faire Bay Area 2015, Interview with Massimo Banzi: Genuino and the future of Arduino

    During the last Maker Faire Bay Area held in San Francisco on May, 15th-17th, we had the incredible chance to meet Mr. Massimo Banzi in flesh and bones. Our CEO Arsenio Spadoni seized the opportunity and interview...

    • Posted 2 years ago
    • 0
  • See this amazing Ringly BT notification ring teardown on Adafruit

    Look at this beautiful teardown project on adafruit of the amazing Ringly BT wearable device. Ringly is a bluetooth notification device build into a metal and stone cocktail ring. The light on the side flashes different colors when...

    • Posted 2 years ago
    • 0
  • thermostat.69
    Adafruit working on an open source Raspberry Pi based “Nest” ?

    Interesting news from Adafruit Today is “open source Nest” day it seems! We are considering doing an open source Nest based on the Raspberry Pi if there’s enough interest – designed by Adafruit & Mike Doell. Here...

    • Posted 3 years ago
    • 0
  • LCD_RaspFea
    An LCD Expansion Shield for your RaspberryPi

    Today we introduce a great LCD expansion shield for Raspberry Pi that allows you to create an interface to control applications without the need to constantly keep a monitor, keyboard and mouse connected. Cool! Isn’t it?  ...

    • Posted 3 years ago
    • 7
  • helmetcitybike
    A clever invention: Citi Bike “Smart” Helmet Navigates to the Nearest Station (from Adafruit)

    Improve your visibility with a glowing bike helmet! Becky Stern mods up a Carrera folding helmet with LED strip in the grooves that helps navigate you to the nearest Citi Bike station with a FLORA GPS. Full...

    • Posted 3 years ago
    • 0
  • limor_featured
    An interview with LadyAda, Limor Fried founder of Adafruit

    Limor Fried aka Ladyada is the founder of the Adafruit Industries. Besides having been featured on Wired’s cover she is a continue inspiration for hackers and entrepreneurs worldwide. We had the chance to interview her on a...

    • Posted 4 years ago
    • 2
  • mega2
    An Arduino MEGA and Leonardo Pinout Diagrams from the adafruit community

    Check out these inspiring Arduino pin-out diagrams from “pighixxx” member of our community in the Adafruit Forums, the MEGA (above) and Leonardo (below) An incredible Pinout diagram from the Adafruit community. There’s also the Leonardo, check out...

    • Posted 4 years ago
    • 0
  • The new Adafruit GEMMA
    Adafruit presents Gemma, a new miniature wearable electronic platform

      Adafruit launches a new platform for the development of wearable devices: Gemma is a tiny wearable platform board with a lot of might in a 1″ diameter package. Powered by a Attiny85 and programmable with an...

    • Posted 4 years ago
    • 1